Fisher-Price 73535 owner manual Battery Installation, Push

H

Battery Installation

IMPORTANT! Use only a Power Wheels® 12 volt battery. Use of any other battery will damage your mini-bike. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels® 12 volt charger before operating your mini-bike for the first time. Charge the battery for at least 14 hours after each use of the mini-bike. Never charge the battery longer than 30 hours. Failure to follow these instructions may damage your battery and will void your warranty.

1	Battery
	Compartment
	Cover
	PUSH
	Release
	Button

•While pushing the release button on the battery compartment cover, lift it from the mini-bike.

2

Motor Harness

Connector

12 Volt Battery

•Plug the motor harness connector into the battery socket.

Push firmly to make sure the motor harness connector is completely inserted into the battery.

•Lower the battery into the battery compartment.

3

Tab

•At an angle, insert the front tab on the cover into the slot in the mini-bike floor.

•Push down on the cover to “snap” it into place.

14