Adjusting the Brakes

Loosen

and

Remove

Brake Compartment Cover

•Turn the mini-bike on its side.

•Loosen and remove the screws in the brake compartment cover.

Brake Compartment

•Turn the mini-bike over and remove the other two screws in the brake compartment cover.

•Remove the brake compartment cover and locate brake cable, lock nut and adjustable knob.

	Brake	Lock Nut
Lock Nut	Adjustment
		Metal Bracket
	Knob

•Turn the lock nut counter-clockwise a few turns to loosen it.

•Turn the brake adjustment knob counter-clockwise a few turns to close the gap.

•Again, examine the brake handle to be sure there is no gap between the brake base and the brake handle. Re-tighten the brake adjustment knob if still needed.

•After you are satisfied that you have properly closed the gap between the brake base and the break handle, hold the brake adjustment knob in position and turn the lock nut clockwise until it stops against the metal bracket.

•Replace the brake compartment cover and the four screws. Tighten all four screws with a Phillips screwdriver. Do not over-tighten.

Hint: The location of the brake handle is adjustable for your child’s comfort. To adjust, loosen the screw on the back of the brake handle with the Allen wrench provided. Slide or rotate the handle to the desired location and re-tighten the screw with the Allen wrench.