Fisher-Price 73535 owner manual Assembly, Shown Actual Size

E

Assembly

WARNING

Children can be harmed by small parts, sharp edges and sharp points in the mini- bike’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the mini-bike. Children should not handle parts, including the battery, or help in assembly of the mini-bike.

1

Plastic Tie

Handlebars

•Using safety scissors, remove the plastic tie from the handlebars. DO NOT cut the power wires or brake cables.

2	Front
	Fork
Fender Tab	Slot

•Stand the frame assembly upright.

•At an angle, insert the fender tab into the slot in the front fork. Lower the fender into place.

3
Front Fork	#8 x 1" Screw - 2
Shocks
	SHOWN ACTUAL SIZE

•Insert a #8 x 1" screw through the hole in each front fork shock and into the fender. Tighten the screws with a Phillips screwdriver. Do not over-tighten.

4	Throttle Button
	Brake
	Handlebars
Rear of
Mini-Bike

•Position the handlebars so that the grips point outward and the throttle button faces the rear of the mini-bike.

Hint: If you are sitting on the seat of the mini-bike, the power button will be on the right and the brake will be on the left.

• Insert each handlebar into the holes in the front fork.

7