Fisher-Price 73535 owner manual Both Shown Actual Size

	Assembly
5	6
	Allen Wrench
	Adjustable Wrench

	• While holding the lock nut with an adjustable wrench
	(or a 7/16" wrench), tighten the bolt with the Allen wrench.
Rounded Edge	Do not over-tighten.
	• Check to be sure the handlebar is securely attached.
	Lift it and push it from side to side. It should not move.
	If it does move, tighten the bolt a few more turns with
19/16" Bolt - 2	the Allen wrench.
7/16" Lock Nut - 2	• Repeat steps 5 and 6 to fasten the other handlebar to
	9	7	/16" lock nut.
	the front fork with a 1 /16" bolt and

BOTH SHOWN ACTUAL SIZE
• Lift a handlebar to align the hole in the handlebar with	7	Handlebar
		Brake Cables
the hole in the front fork.
• Insert a 19/16" screw through the outer edge of the
front fork, handlebar and then out the inner edge of	Power Wires
the front fork.
• Attach a 7/16" lock nut (rounded edge outward) to the	Cut off
end of the screw and hand-tighten it.
	Excess
	Plastic Tie
	• Wrap the plastic tie around the brake cables, power
	wires and the handlebar.
	• Insert the flat end of the plastic tie into the opening
	in the square end of the plastic tie. Pull the flat end of
	the plastic tie with pliers to be sure it is tight around
	the handlebar.
8	• Using safety scissors, cut off the excess plastic tie.
	Throw the excess plastic tie away.