Battery Charging
IMPORTANT!
•Your new battery must be charged for at least
18 hours before you use it in your
new
•The battery must be upright while charging.
•The charger is not a toy.
•Do not short circuit the battery.
•Before charging the battery, examine the battery case for cracks and other damage which may cause sulfuric acid (electrolyte) to leak during the charging process.
If damage is detected, do not charge the battery or use it in your
•Do not charge the battery on a surface (such as kitchen countertops) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you charge your battery.
•Use only a Power Wheels® 12 volt charger with type “12V” connector (120 VAC 60 Hz 28W with an output of 12 VDC 1200mA) to charge your Power Wheels® rechargeable 12 volt battery.
•For best performance, use only a Power Wheels®
12 volt battery. Please contact your local Power Wheels® Authorized Service Center for a replacement battery.
To find the authorized service center nearest you, see page 23 or call
•If your battery is old and will not accept a charge, do not leave it in the
Battery | 2 |
1
Charger
Connector
• Plug the charger connector into the battery 1 .
• Plug the charger into a standard 120 volt wall outlet 2 .
Note: If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”.
•Before
•Recharge the battery for at least 14 hours after each use of your vehicle. Do not charge the battery longer than 30 hours.
•Once the battery is charged, pull firmly on the charger connector to disconnect it from the battery. Unplug the charger from the wall outlet. The battery is now ready to be installed in your
6