Horizon Fitness AT1501 manual Troubleshooting, Monthly LOG Sheet, Week #, Calories Time

INTRODUCTION IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE ASCENT TRAINER CONDITIONING TROUBLESHOOTING LIMITED

YOU BEGIN OPERATION GUIDELINES & MAINTENANCE WARRANTY

30

MONTHLY LOG SHEET

T R O U B L E S H O O T I N G

Your Horizon Fitness ascent trainer is designed to be reliable. However, if you do experience problems with your ascent trainer, please reference the troubleshooting guide listed below.

PROBLEM: The console does not turn on.

SOLUTION: Verify the following:

•The outlet the machine is plugged into is functional. Double check that the breaker has not tripped.

•The correct adapter is being used. Only use the adapter provided or authorized by Horizon.

•The adapter is not pinched or damaged and is properly plugged into the outlet AND the machine.

•The power switch is turned to the ON position (may not apply to all models).

•Unplug the power cord. Remove the console and check that all connections to the console are secure and not

damaged or pinched.

•

PROBLEM: The console lights up but the Time/RPM’s do not count.

SOLUTION: Verify the following:

•Unplug the power cord. Remove the console and check that all connections to the console are secure and not damaged or pinched.

•If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or damaged.

PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.

SOLUTION: Verify the following:

•The correct adapter is being used. Only use the adapter provided or authorized by Horizon.

•Reset the console and allow the resistance to reset to the default position. Restart and retry the resistance levels.

31

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

LIMITED TROUBLESHOOTING CONDITIONING ASCENT TRAINER BEFORE WARRANTY & MAINTENANCE GUIDELINES OPERATION YOU BEGIN