4.Press TEST to start checking the speaker output balance.
“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following order:
Left front |
| Center |
| Right front |
speaker |
| speaker |
| speaker |
Rear speakers
5.If necessary, adjust the speaker output balance as follows:
•To adjust the rear speaker output level, press REAR
(L)
•To adjust the center speaker output level, press CENTER
Pressing – decreases the output level up to
6. Press TEST again to stop the test tone.
If you have selected JVC Theater Surround, go to the following steps.
7.Press EFFECT to adjust the effect level.
Each time you press the button, the effect level changes as follows:
EFFECT 1 
EFFECT 2 
EFFECT 3
EFFECT 5 
EFFECT 4
As the number increases, the effect of the Theater
Surround mode becomes stronger.
TEST
6
REAR
(L)
CENTER
TEST
6
EFFECT
4
Notes:
•No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”
•No test tone comes out of the center speaker when you select “PHANTOM” for the center mode.
Notes:
•The sound level of the left and right rear speakers will be the same.
•You cannot set the sound level of the rear speakers when you have selected “3CHLOGIC.”
•You cannot set the sound level of the center speaker when you select “PHANTOM” for the center mode.
Note:
When you have selected “PROLOGIC” or “3CHLOGIC,” you cannot select the effect level.
36