JVC RX-664VBK manual Using the DVD Multi Playback Mode

Using the DVD MULTI Playback Mode

6. Press Control %/ Þ until “–REAR L+” appears on the display.

7. Press Control @ / #to adjust the left rear speaker output level.

•Pressing Control @decreases the output level up to –10 dB.

• Pressing Control #increases the output level up to +10 dB.

8. Press Control %/ Þ until “–REAR R+” appears on the display.

9. Press Control @ / #to adjust the right rear speaker output level.

• Pressing Control @decreases the output level up to –10 dB.

• Pressing Control #increases the output level up to +10 dB.

From the remote control:

1. Press DVD MULTI until “DVD MULTI” appears on the display.

2.	Select the analog discrete output mode on the DVD
	player, and start playing a DVD.
	Refer to the manual supplied with the DVD player.
If you want to make any adjustment, go to the following steps.
3.	Press CENTER +/– to adjust the center speaker
	output level.	CENTER
	• Pressing CENTER – decreases the output level up to –10 dB.
	• Pressing CENTER + increases the output level up to +10 dB.

4.Press REAR (L) +/– to adjust the left rear speaker output level.

•Pressing REAR (L) – decreases the output level up to –10 dB.

•Pressing REAR (L) + increases the output level up to +10 dB.

REAR

(L)

5.Press SOUND CONTROL, then press REAR•R +/– to adjust the right rear speaker output level.

•Pressing REAR•R – decreases the output level up to –10 dB.

•Pressing REAR•R + increases the output level up to +10 dB.

SOUND

CONTROL

100+ – REAR•R +

+10 0

39