JVC RX-664VBK manual From the front panel, Using Surround Modes, To cancel Surround mode

Using the Surround Processor

Using Surround Modes

Once you have adjusted the surround mode you can use the same adjustments every time you want to enjoy Surround modes.

From the front panel:

SURROUND

1. Press SURROUND so that the Control %/ Þbuttons work for selecting the Surround Processor mode.

The lamp above the button lights up.

2. Press Control %/ Þ to select one of the Surround mode (“PROLOGIC,” “3CHLOGIC” or “THEATER”).

Each time you press the button, the Surround Processor modes change as follows:

Ex. PROLOGIC THEATER 3CHLOGIC

OFF 3DACTION* PAVILION*

*As for the 3D-PHONIC modes (see page 27) and the DAP modes (see page 29), one of the previously selected mode appears on the display.

3.Select and play a sound source which was processed with Dolby Surround and

is labeled with DOLBY SURROUND mark.

To cancel Surround mode

Select “OFF” in step 2 above.

From the remote control:

1. Press SOUND CONTROL so that 10 keys work for							CONTROL
							SOUND
	adjusting the sound.
2. Press SURROUND until the mode you want appears
	on the display.						SURROUND
	The previous mode is recalled (with its previous					3
	settings) and is shown on the display.
	The indicator for that mode also lights up on the display.
	Each time you press the button, the surround modes
	change as follows:
		THEATER	3CHLOGIC		PROLOGIC
				OFF

3.Select and play a sound source which was processed with Dolby Surround and

is labeled with DOLBY SURROUND mark.

To cancel surround mode

Select “OFF” in step 2 above.

Note:

When one of the surround modes is selected, the corresponding indicator lights up on the display.

37