Invacare RPA600-1E manual Transferring the Patient, Performing Maintenance

Page 10

SECTION 1—GENERAL GUIDELINES

Before lifting a patient from a stationary object (wheelchair, commode or bed), slightly raise the patient off the stationary object and check that all sling attachments are secure. If any attachment is not correct, lower the patient and correct the problem, then raise the patient and check again.

During transfer, with the patient suspended in a sling attached to the lift, DO NOT roll caster base over objects such as carpet, raised carpet bindings, door frames, or any uneven surfaces or obstacles that would create an imbalance of the patient lift and could cause the patient lift to tip over. Use steering handle on the mast at ALL times to push or pull the patient lift.

Invacare recommends locking the rear swivel casters ONLY when positioning or removing the sling (stand assist or transfer) from around the patient.

Invacare does NOT recommend locking of the rear casters of the patient lift when lifting an individual. Doing so could cause the lift to tip and endanger the patient and assistants. Invacare DOES recommend that the rear casters be left unlocked during lifting procedures to allow the patient lift to stabilize itself when the patient is initially lifted from a chair, bed or any stationary object.

Transferring the Patient

Before transferring, check that the product’s weight capacity can withstand the patientʹs weight.

Wheelchair wheel locks MUST be in a locked position before lowering the patient into the wheelchair for transport.

Performing Maintenance

Regular maintenance of patient lifts and accessories is necessary to assure proper operation.

After the first 12 months of operation, inspect all pivot points and fasteners for wear. If the metal is worn, the parts MUST be replaced. Perform this inspection every six months thereafter.

DO NOT overtighten mounting hardware. This will damage mounting brackets.

Casters and axle bolts require inspections every six months to check for tightness and wear.

Electric Portable Patient Lift - RPA6001E

10

Part No 1078988

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Electric Portable Patient Lift RPA600-1E Symbol Legend Accessories WarningTable of Contents Limited Warranty Special Notes Label Location Patient Lift RPA600-1E Product ParametersReliant Scale RLS6 General Guidelines Weight LimitationUsing the Sling Assembling the LiftOperating the Lift Lifting the PatientPerforming Maintenance Transferring the PatientAssembling the Patient Lift AssemblyAssembling the Mast to the Base Assembling the Electric Actuator to the Boom Assembling the Electric ActuatorInstalling the Shifter Handle Attaching the Battery Charger Mounting Bracket to the WallIntroduction OperationOperating the Patient Lift Operating the Patient Lift Closing/Opening the Legs Opening the LegsActivating a Mechanical Emergency Release Primary Emergency ReleaseCharging the Battery Charging the BatteryPreparing the Lift for Use Lifting the PatientPositioning the Lift Lifting/Moving the Patient Attaching a Sling to the Swivel BarLifting/Moving the Patient Transferring the Patient Transferring to a Commode Chair Transferring to a Commode ChairTransferring to a Standard Commode Transferring to a WheelchairTransferring to a Wheelchair Troubleshooting Symptoms Faults SolutionMaintenance Maintenance Safety Inspection ChecklistLubricating the Lift Lubricating the LiftDetecting Wear and Damage Cleaning the Sling and the LiftReplacing the Electric Actuator Checking and Tightening Mast Pivot Bolt Replacing the Swivel BarReplacing the Swivel Bar Accessories Removing the Swivel BarInstalling the Reliant Scale Installing the Reliant ScaleOperating the Scale Keypad FunctionsWeighing the Patient Replacing the Battery Calibrating the Reliant ScaleTroubleshooting Display CodesElectric Portable Patient Lift RPA6001E Limited Warranty USA

RPA600-1E specifications

The Invacare RPA600-1E is a versatile and innovative powered wheelchair designed with user comfort and mobility in mind. This model is engineered to provide individuals with a high level of independence, promoting an active lifestyle while ensuring safety and ease of use.

One of the standout features of the Invacare RPA600-1E is its advanced seating system. The chair comes equipped with a contour seating design that delivers excellent postural support, which is crucial for long-term comfort and well-being. Users benefit from a wide range of adjustments, allowing caregivers to customize the positioning based on individual needs. The breathable upholstery also contributes to overall comfort, reducing the risk of pressure sores during prolonged use.

The wheelchair incorporates the latest in battery technology, featuring high-capacity lithium-ion batteries that allow for longer ranges between charges. This enhancement is particularly beneficial for users who require a dependable chair for daily activities, providing the user with an extended travel range of up to 25 miles on a single charge. The quick charge capability ensures that the wheelchair is ready to go when needed.

For added safety, the Invacare RPA600-1E comes with innovative anti-tip technology and a robust frame design that offers stability on various terrains. The improved suspension system is another highlight, enabling smooth transitions over bumps and curbs, which enhances the user experience during outdoor excursions.

Another important aspect is the intuitive joystick control, which allows for precise maneuvers in tight spaces. The joystick is easy to operate, enabling users to navigate with confidence in both indoor and outdoor environments. There are additional customizable features such as programmable speed settings that allow users to adjust the chair's responsiveness according to their comfort levels.

The Invacare RPA600-1E also prioritizes user safety with features such as automatic braking, providing peace of mind on inclines or uneven surfaces. This wheelchair is compatible with various accessories and support options, allowing for further customization to meet specific needs.

Overall, the Invacare RPA600-1E is a state-of-the-art powered wheelchair that prioritizes comfort, safety, and user independence, making it an excellent choice for those seeking to enhance their mobility and quality of life.
Top Page Image Contents