Invacare RPA600-1E manual Transferring to a Standard Commode, Transferring to a Wheelchair

Page 24

SECTION 5—TRANSFERRING THE PATIENT

Transferring to a Standard Commode

NOTE: The Invacare patient lift is NOT intended as a transport device. Moving a person suspended in a sling over any distance is NOT recommended. If the bathroom facilities are not near the bed or if the patient lift cannot be easily maneuvered towards the commode, then the patient MUST be transferred to a wheelchair and transported to the bathroom facilities before using the patient lift again to position the patient on a standard commode. Refer to Transferring to a Wheelchair.

1.Use an empty patient lift to check if the patient lift can maneuver around the commode.

2.If the patient lift can maneuver around the commode, lift the patient from the bed. Refer to Lifting the Patient on page 19.

3.Transport the patient to the bathroom facility.

4.Press the UP/DOWN buttons on the hand control to elevate the patient high enough to clear the commode. Their weight will be supported by the patient lift.

5.Guide the patient onto the commode. This may require two assistants.

6.Press the DOWN button on the hand control to lower the patient onto the standard commode leaving the sling attached to the swivel bar hooks.

7.When complete, recheck the sling for correct attachments.

8.Press the UP button on the hand control to raise the patient off the commode.

9.When patient is clear of the commode surface (using the steering handle), move the lift away from the commode.

10.To return the patient to bed, reverse Lifting the Patient on page 19.

11.To return or place patient in a wheelchair, refer to Transferring to a Wheelchair.

Transferring to a Wheelchair

NOTE: For this procedure, refer to FIGURE 5.2.

1.Lift the patient from the bed. Refer to Lifting the Patient on page 19.

2.Ensure the legs of the lift with patient in the sling are in the open position. Press the legs open button until in maximum open position.

3.Move the wheelchair into position.

4.Engage the wheel locks of the wheelchair to prevent movement of the chair.

WARNING

DO NOT place the patient in the wheelchair if the locks are not engaged. The wheelchair wheel locks MUST be in a locked position before lowering the patient into the wheelchair for transport. Otherwise, injury may result.

Electric Portable Patient Lift - RPA6001E

24

Part No 1078988

Image 24
Contents Electric Portable Patient Lift RPA600-1E Symbol Legend Accessories WarningTable of Contents Limited Warranty Special Notes Label Location Product Parameters Patient Lift RPA600-1EReliant Scale RLS6 Weight Limitation Using the SlingGeneral Guidelines Assembling the LiftOperating the Lift Lifting the PatientPerforming Maintenance Transferring the PatientAssembly Assembling the Patient LiftAssembling the Mast to the Base Assembling the Electric Actuator to the Boom Assembling the Electric ActuatorInstalling the Shifter Handle Attaching the Battery Charger Mounting Bracket to the WallOperation IntroductionOperating the Patient Lift Operating the Patient Lift Closing/Opening the Legs Opening the LegsActivating a Mechanical Emergency Release Primary Emergency ReleaseCharging the Battery Charging the BatteryLifting the Patient Preparing the Lift for UsePositioning the Lift Lifting/Moving the Patient Attaching a Sling to the Swivel BarLifting/Moving the Patient Transferring the Patient Transferring to a Commode Chair Transferring to a Commode ChairTransferring to a Standard Commode Transferring to a WheelchairTransferring to a Wheelchair Troubleshooting Symptoms Faults SolutionMaintenance Maintenance Safety Inspection ChecklistLubricating the Lift Lubricating the LiftCleaning the Sling and the Lift Detecting Wear and DamageReplacing the Electric Actuator Checking and Tightening Mast Pivot Bolt Replacing the Swivel BarReplacing the Swivel Bar Accessories Removing the Swivel BarInstalling the Reliant Scale Installing the Reliant ScaleOperating the Scale Keypad FunctionsWeighing the Patient Replacing the Battery Calibrating the Reliant ScaleTroubleshooting Display CodesElectric Portable Patient Lift RPA6001E Limited Warranty USA

RPA600-1E specifications

The Invacare RPA600-1E is a versatile and innovative powered wheelchair designed with user comfort and mobility in mind. This model is engineered to provide individuals with a high level of independence, promoting an active lifestyle while ensuring safety and ease of use.

One of the standout features of the Invacare RPA600-1E is its advanced seating system. The chair comes equipped with a contour seating design that delivers excellent postural support, which is crucial for long-term comfort and well-being. Users benefit from a wide range of adjustments, allowing caregivers to customize the positioning based on individual needs. The breathable upholstery also contributes to overall comfort, reducing the risk of pressure sores during prolonged use.

The wheelchair incorporates the latest in battery technology, featuring high-capacity lithium-ion batteries that allow for longer ranges between charges. This enhancement is particularly beneficial for users who require a dependable chair for daily activities, providing the user with an extended travel range of up to 25 miles on a single charge. The quick charge capability ensures that the wheelchair is ready to go when needed.

For added safety, the Invacare RPA600-1E comes with innovative anti-tip technology and a robust frame design that offers stability on various terrains. The improved suspension system is another highlight, enabling smooth transitions over bumps and curbs, which enhances the user experience during outdoor excursions.

Another important aspect is the intuitive joystick control, which allows for precise maneuvers in tight spaces. The joystick is easy to operate, enabling users to navigate with confidence in both indoor and outdoor environments. There are additional customizable features such as programmable speed settings that allow users to adjust the chair's responsiveness according to their comfort levels.

The Invacare RPA600-1E also prioritizes user safety with features such as automatic braking, providing peace of mind on inclines or uneven surfaces. This wheelchair is compatible with various accessories and support options, allowing for further customization to meet specific needs.

Overall, the Invacare RPA600-1E is a state-of-the-art powered wheelchair that prioritizes comfort, safety, and user independence, making it an excellent choice for those seeking to enhance their mobility and quality of life.