Invacare RPA600-1E manual Troubleshooting, Display Codes

Page 37

SECTION 8—ACCESSORIES

3.Press the CAL button located on the PC board. The CAL switch is not labeled but is the only button on the PC board located in the lower right corner. Once the CAL button is pushed ʺCAL1ʺ will be seen in the display window.

NOTE: CAL1 selects the calibration mode using 50 pounds of calibrated weight. CAL2 selects the calibration mode for use with 200 pounds of calibrated weight. Pressing the UNITS key toggles between CAL1 and CAL2.

4. When the desired calibration mode is displayed, press the LOCK/UNLOCK key.

NOTE: The display window will now show UnLd.

5.Ensure that there is no load on the scale and press the ZERO key.

6.The display window will show a dashed line (‐‐‐‐‐‐) scrolling across and then the word LOAD will appear in the display window.

7.Perform one of the following:

A.FOR CAL1 OPTION ‐ support 50 pounds of calibrated weight from the scale and press the ZERO key.

B.FOR CAL2 OPTION ‐ support 200 pounds of calibrated weight from the scale and press the ZERO key.

8.The display window will show a dashed line (‐‐‐‐‐‐) scrolling across and then the word DONE will appear in the display window.

9.Remove the weight from the scale and press the LOCK/UNLOCK key.

NOTE: The unit will now be in a temporary test mode and will not lock the weight display. This will allow weight to be loaded and unloaded to check the calibration.

10.Turn the unit off by pressing the ON/OFF key.

11.Turn the unit on by pressing the ON/OFF key.

NOTE: Scale will now be in normal operation.

Troubleshooting

SYMPTON

PROBABLE CAUSE

SOLUTIONS

Unit does NOT work properly.

Battery failure.

Check battery. Replace if necessary.

 

 

 

Battery has been replaced and unit

 

Contact Invacare for Service at 1-800-333-

still does NOT work properly.

 

6900

 

 

 

Display Codes

CAL

CALIBRATION REQUIRED ‐ Indicates improper stored calibration data, calibration is necessary.

OCAP

OVER CAPACITY ‐ Indicates a weight exceeding the capacity has been loaded on the scale.

Part No 1078988

37

Electric Portable Patient Lift - RPA6001E

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Electric Portable Patient Lift RPA600-1E Accessories Warning Symbol LegendTable of Contents Limited Warranty Special Notes Label Location Patient Lift RPA600-1E Product ParametersReliant Scale RLS6 Using the Sling Weight LimitationGeneral Guidelines Assembling the LiftLifting the Patient Operating the LiftTransferring the Patient Performing MaintenanceAssembling the Patient Lift AssemblyAssembling the Mast to the Base Assembling the Electric Actuator Assembling the Electric Actuator to the BoomAttaching the Battery Charger Mounting Bracket to the Wall Installing the Shifter HandleIntroduction OperationOperating the Patient Lift Operating the Patient Lift Opening the Legs Closing/Opening the LegsPrimary Emergency Release Activating a Mechanical Emergency ReleaseCharging the Battery Charging the BatteryPreparing the Lift for Use Lifting the PatientPositioning the Lift Attaching a Sling to the Swivel Bar Lifting/Moving the PatientLifting/Moving the Patient Transferring the Patient Transferring to a Commode Chair Transferring to a Commode ChairTransferring to a Wheelchair Transferring to a Standard CommodeTransferring to a Wheelchair Symptoms Faults Solution TroubleshootingMaintenance Safety Inspection Checklist MaintenanceLubricating the Lift Lubricating the LiftDetecting Wear and Damage Cleaning the Sling and the LiftReplacing the Electric Actuator Replacing the Swivel Bar Checking and Tightening Mast Pivot BoltReplacing the Swivel Bar Removing the Swivel Bar AccessoriesInstalling the Reliant Scale Installing the Reliant ScaleKeypad Functions Operating the ScaleWeighing the Patient Calibrating the Reliant Scale Replacing the BatteryDisplay Codes TroubleshootingElectric Portable Patient Lift RPA6001E Limited Warranty USA

RPA600-1E specifications

The Invacare RPA600-1E is a versatile and innovative powered wheelchair designed with user comfort and mobility in mind. This model is engineered to provide individuals with a high level of independence, promoting an active lifestyle while ensuring safety and ease of use.

One of the standout features of the Invacare RPA600-1E is its advanced seating system. The chair comes equipped with a contour seating design that delivers excellent postural support, which is crucial for long-term comfort and well-being. Users benefit from a wide range of adjustments, allowing caregivers to customize the positioning based on individual needs. The breathable upholstery also contributes to overall comfort, reducing the risk of pressure sores during prolonged use.

The wheelchair incorporates the latest in battery technology, featuring high-capacity lithium-ion batteries that allow for longer ranges between charges. This enhancement is particularly beneficial for users who require a dependable chair for daily activities, providing the user with an extended travel range of up to 25 miles on a single charge. The quick charge capability ensures that the wheelchair is ready to go when needed.

For added safety, the Invacare RPA600-1E comes with innovative anti-tip technology and a robust frame design that offers stability on various terrains. The improved suspension system is another highlight, enabling smooth transitions over bumps and curbs, which enhances the user experience during outdoor excursions.

Another important aspect is the intuitive joystick control, which allows for precise maneuvers in tight spaces. The joystick is easy to operate, enabling users to navigate with confidence in both indoor and outdoor environments. There are additional customizable features such as programmable speed settings that allow users to adjust the chair's responsiveness according to their comfort levels.

The Invacare RPA600-1E also prioritizes user safety with features such as automatic braking, providing peace of mind on inclines or uneven surfaces. This wheelchair is compatible with various accessories and support options, allowing for further customization to meet specific needs.

Overall, the Invacare RPA600-1E is a state-of-the-art powered wheelchair that prioritizes comfort, safety, and user independence, making it an excellent choice for those seeking to enhance their mobility and quality of life.
Top Page Image Contents