Invacare RPA600-1E manual Operating the Lift, Lifting the Patient

Page 9

SECTION 1—GENERAL GUIDELINES

Stand Assist Slings: Before lifting the patient, make sure the bottom edge of the stand assist sling is positioned on the lower back of the patient and the patient’s arms are outside the stand assist sling.

Stand Assist Slings: The belt MUST be snug, but comfortable on the patient, otherwise the patient can slide out of the sling during transfer, possibly causing injury.

Transfer Slings: Before lifting the patient, make sure the bottom edge of the transfer sling is at the base of the spine and the patient’s arms are outside the transfer sling.

Transfer Slings: DO NOT raise the patient to a full standing position while using the transfer sling, otherwise injury may occur.

DO NOT use any kind of plastic back incontinence pad or seating cushion between patient and sling material that may cause the patient to slide out of the sling during transfer.

After each laundering (in accordance with instructions on the sling), inspect sling(s) for wear, tears, and loose stitching.

Bleached, torn, cut, frayed, or broken slings are unsafe and could result in injury. Discard immediately.

DO NOT alter slings.

Be sure to check the sling attachments each time the sling is removed and replaced, to ensure that it is properly attached before the patient is removed from a stationary object (bed, chair or commode).

If the patient is in a wheelchair, secure the wheel locks in place to prevent the chair from moving forwards or backwards.

When connecting slings equipped with color coded straps to the patient lift, the shortest of the straps MUST be at the back of patient for support. Using long section will leave little or no support for patientʹs back. The loops of the sling are color coded and can be used to place patient in various positions. The colors make it easy to connect both sides of the sling equally. Make sure that there is sufficient head support when lifting a patient.

Operating the Lift

Make sure there is an audible click when mounting battery on the battery charger to confirm proper mounting. Otherwise, injury or damage may occur.

Use the handles to push or pull the patient lift.

Lifting the Patient

Before positioning the legs of the stand up lift around the patient, make sure that the patient’s feet are out of the way of the foot plate, otherwise injury may occur.

Adjustments for safety and comfort should be made before moving the patient. Patientʹs arms should be outside of the sling straps.

Part No 1078988

9

Electric Portable Patient Lift - RPA6001E

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Electric Portable Patient Lift RPA600-1E Accessories Warning Symbol LegendTable of Contents Limited Warranty Special Notes Label Location Product Parameters Patient Lift RPA600-1EReliant Scale RLS6 Using the Sling Weight LimitationGeneral Guidelines Assembling the LiftLifting the Patient Operating the LiftTransferring the Patient Performing MaintenanceAssembly Assembling the Patient LiftAssembling the Mast to the Base Assembling the Electric Actuator Assembling the Electric Actuator to the BoomAttaching the Battery Charger Mounting Bracket to the Wall Installing the Shifter HandleOperation IntroductionOperating the Patient Lift Operating the Patient Lift Opening the Legs Closing/Opening the LegsPrimary Emergency Release Activating a Mechanical Emergency ReleaseCharging the Battery Charging the BatteryLifting the Patient Preparing the Lift for UsePositioning the Lift Attaching a Sling to the Swivel Bar Lifting/Moving the PatientLifting/Moving the Patient Transferring the Patient Transferring to a Commode Chair Transferring to a Commode ChairTransferring to a Wheelchair Transferring to a Standard CommodeTransferring to a Wheelchair Symptoms Faults Solution TroubleshootingMaintenance Safety Inspection Checklist MaintenanceLubricating the Lift Lubricating the LiftCleaning the Sling and the Lift Detecting Wear and DamageReplacing the Electric Actuator Replacing the Swivel Bar Checking and Tightening Mast Pivot BoltReplacing the Swivel Bar Removing the Swivel Bar AccessoriesInstalling the Reliant Scale Installing the Reliant ScaleKeypad Functions Operating the ScaleWeighing the Patient Calibrating the Reliant Scale Replacing the BatteryDisplay Codes TroubleshootingElectric Portable Patient Lift RPA6001E Limited Warranty USA

RPA600-1E specifications

The Invacare RPA600-1E is a versatile and innovative powered wheelchair designed with user comfort and mobility in mind. This model is engineered to provide individuals with a high level of independence, promoting an active lifestyle while ensuring safety and ease of use.

One of the standout features of the Invacare RPA600-1E is its advanced seating system. The chair comes equipped with a contour seating design that delivers excellent postural support, which is crucial for long-term comfort and well-being. Users benefit from a wide range of adjustments, allowing caregivers to customize the positioning based on individual needs. The breathable upholstery also contributes to overall comfort, reducing the risk of pressure sores during prolonged use.

The wheelchair incorporates the latest in battery technology, featuring high-capacity lithium-ion batteries that allow for longer ranges between charges. This enhancement is particularly beneficial for users who require a dependable chair for daily activities, providing the user with an extended travel range of up to 25 miles on a single charge. The quick charge capability ensures that the wheelchair is ready to go when needed.

For added safety, the Invacare RPA600-1E comes with innovative anti-tip technology and a robust frame design that offers stability on various terrains. The improved suspension system is another highlight, enabling smooth transitions over bumps and curbs, which enhances the user experience during outdoor excursions.

Another important aspect is the intuitive joystick control, which allows for precise maneuvers in tight spaces. The joystick is easy to operate, enabling users to navigate with confidence in both indoor and outdoor environments. There are additional customizable features such as programmable speed settings that allow users to adjust the chair's responsiveness according to their comfort levels.

The Invacare RPA600-1E also prioritizes user safety with features such as automatic braking, providing peace of mind on inclines or uneven surfaces. This wheelchair is compatible with various accessories and support options, allowing for further customization to meet specific needs.

Overall, the Invacare RPA600-1E is a state-of-the-art powered wheelchair that prioritizes comfort, safety, and user independence, making it an excellent choice for those seeking to enhance their mobility and quality of life.
Top Page Image Contents