Invacare RPA600-1E manual Installing the Reliant Scale

Page 33

SECTION 8—ACCESSORIES

Installing the Reliant Scale

NOTE: For this procedure, refer to FIGURE 8.2.

WARNING

Patient and sling MUST be removed from the lift during ALL installation proce- dures.

1.Position the load cell assembly of the Reliant Scale into the boom mounting bracket. Refer to Detail ʺAʺ in FIGURE 8.2.

NOTE: Use 1/4‐inch nylon washer.

2.Secure the Reliant Scale to the boom mounting bracket with a shoulder bolt, two nylon washers and a locknut. Securely tighten. Refer to Detail ʺAʺ in FIGURE 8.2 for washer orientation.

NOTE: Ensure the shaft of the shoulder bolt passes through both sides of the boom mounting bracket.

3.Insert swivel bar pin with two nylon washers through the swivel bar. Refer to Detail ʺBʺ in FIGURE 8.2.

4.Align the mounting holes in the swivel bar pin with the mounting holes in the load cell assembly. Refer to Detail ʺBʺ in FIGURE 8.2.

5.Secure swivel bar pin to the load cell assembly with the provided mounting screw and locknut. Securely tighten. Refer to Detail ʺBʺ in FIGURE 8.2.

WARNING

After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur.

6.Weigh the patient. Refer to Operating the Scale on page 34 and Weighing the Patient on page 35.

DETAIL “A”

Boom

Locknut

 

Boom

 

Mounting

 

Bracket

Shoulder

Nylon

Bolt

 

Washer

Nylon

 

Washer

Reliant

Load Cell

Scale

Assembly

 

Reliant

DETAIL “B”

Scale

 

Mounting

Screw

Locknut

Nylon

Swivel Bar

Washers

 

Swivel Bar Pin

Part No 1078988

33

Electric Portable Patient Lift - RPA6001E

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Electric Portable Patient Lift RPA600-1E Accessories Warning Symbol LegendTable of Contents Limited Warranty Special Notes Label Location Product Parameters Patient Lift RPA600-1EReliant Scale RLS6 Using the Sling Weight LimitationGeneral Guidelines Assembling the LiftLifting the Patient Operating the LiftTransferring the Patient Performing MaintenanceAssembly Assembling the Patient LiftAssembling the Mast to the Base Assembling the Electric Actuator Assembling the Electric Actuator to the BoomAttaching the Battery Charger Mounting Bracket to the Wall Installing the Shifter HandleOperation IntroductionOperating the Patient Lift Operating the Patient Lift Opening the Legs Closing/Opening the LegsPrimary Emergency Release Activating a Mechanical Emergency ReleaseCharging the Battery Charging the BatteryLifting the Patient Preparing the Lift for UsePositioning the Lift Attaching a Sling to the Swivel Bar Lifting/Moving the PatientLifting/Moving the Patient Transferring the Patient Transferring to a Commode Chair Transferring to a Commode ChairTransferring to a Wheelchair Transferring to a Standard CommodeTransferring to a Wheelchair Symptoms Faults Solution TroubleshootingMaintenance Safety Inspection Checklist MaintenanceLubricating the Lift Lubricating the LiftCleaning the Sling and the Lift Detecting Wear and DamageReplacing the Electric Actuator Replacing the Swivel Bar Checking and Tightening Mast Pivot BoltReplacing the Swivel Bar Removing the Swivel Bar AccessoriesInstalling the Reliant Scale Installing the Reliant ScaleKeypad Functions Operating the ScaleWeighing the Patient Calibrating the Reliant Scale Replacing the BatteryDisplay Codes TroubleshootingElectric Portable Patient Lift RPA6001E Limited Warranty USA

RPA600-1E specifications

The Invacare RPA600-1E is a versatile and innovative powered wheelchair designed with user comfort and mobility in mind. This model is engineered to provide individuals with a high level of independence, promoting an active lifestyle while ensuring safety and ease of use.

One of the standout features of the Invacare RPA600-1E is its advanced seating system. The chair comes equipped with a contour seating design that delivers excellent postural support, which is crucial for long-term comfort and well-being. Users benefit from a wide range of adjustments, allowing caregivers to customize the positioning based on individual needs. The breathable upholstery also contributes to overall comfort, reducing the risk of pressure sores during prolonged use.

The wheelchair incorporates the latest in battery technology, featuring high-capacity lithium-ion batteries that allow for longer ranges between charges. This enhancement is particularly beneficial for users who require a dependable chair for daily activities, providing the user with an extended travel range of up to 25 miles on a single charge. The quick charge capability ensures that the wheelchair is ready to go when needed.

For added safety, the Invacare RPA600-1E comes with innovative anti-tip technology and a robust frame design that offers stability on various terrains. The improved suspension system is another highlight, enabling smooth transitions over bumps and curbs, which enhances the user experience during outdoor excursions.

Another important aspect is the intuitive joystick control, which allows for precise maneuvers in tight spaces. The joystick is easy to operate, enabling users to navigate with confidence in both indoor and outdoor environments. There are additional customizable features such as programmable speed settings that allow users to adjust the chair's responsiveness according to their comfort levels.

The Invacare RPA600-1E also prioritizes user safety with features such as automatic braking, providing peace of mind on inclines or uneven surfaces. This wheelchair is compatible with various accessories and support options, allowing for further customization to meet specific needs.

Overall, the Invacare RPA600-1E is a state-of-the-art powered wheelchair that prioritizes comfort, safety, and user independence, making it an excellent choice for those seeking to enhance their mobility and quality of life.
Top Page Image Contents