Invacare RPA600-1E manual Lifting/Moving the Patient, Attaching a Sling to the Swivel Bar

Page 20

SECTION 4—LIFTING THE PATIENT

Attaching a Sling to the Swivel Bar

WARNING

The maximum weight capacity of the RPA600-1E patient lift is 600 lbs. DO NOT exceed the maximum weight capacity of the patient lift otherwise, injury or damage may occur.

Before using the sling, read and understand all operating instructions provided in the sling owner’s manual.

Bleached, torn, cut, frayed or broken slings are unsafe and could result in injury. Discard IMMEDIATELY. DO NOT alter slings in any way.

Invacare slings are made specifically for use with Invacare Patient Lifts. For the safety of the patient, DO NOT use slings and patient lifts of different manufacturers.

1.Place the straps of the sling over hooks of the swivel bar.

2.Match the corresponding colors on each side of the sling for an even lift of the patient.

NOTE: The Invacare Swivel Bars have three hookup points per side.

WARNING

The patient lift MUST be moved with the push handles on the mast assembly - otherwise, injury or damage may occur.

DO NOT move the patient outside the center of gravity achieved after the patient is suspended in the sling and the patient lift adjusts.

3.Lift the patient. Refer to Lifting/Moving the Patient.

Lifting/Moving the Patient

WARNING

DO NOT lock the rear casters of the lift when lifting an individual. Locking the rear casters could cause the lift to tip and endanger the patient and assistants.

DO NOT move the patient if the sling is not properly connected to the hooks of the swivel bar. When the sling is elevated a few inches off the surface of the bed and before moving the patient, check again to make sure that the sling is properly connected to the hooks of the swivel bar. If any attachments are NOT properly in place, lower the patient back onto the stationary surface and correct this problem - otherwise, injury or damage may occur.

Adjustments for safety and comfort should be made before moving the patient. Patient's arms should be inside of the straps.

DO NOT use slings and patient lifts of different manufacturers. Invacare slings are made specifically for use with Invacare patient lifts. Injury or damage may occur.

Electric Portable Patient Lift - RPA6001E

20

Part No 1078988

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Electric Portable Patient Lift RPA600-1E Symbol Legend Accessories WarningTable of Contents Limited Warranty Special Notes Label Location Reliant Scale RLS6 Product ParametersPatient Lift RPA600-1E Weight Limitation Using the SlingGeneral Guidelines Assembling the LiftOperating the Lift Lifting the PatientPerforming Maintenance Transferring the PatientAssembling the Mast to the Base AssemblyAssembling the Patient Lift Assembling the Electric Actuator to the Boom Assembling the Electric ActuatorInstalling the Shifter Handle Attaching the Battery Charger Mounting Bracket to the WallOperating the Patient Lift OperationIntroduction Operating the Patient Lift Closing/Opening the Legs Opening the LegsActivating a Mechanical Emergency Release Primary Emergency ReleaseCharging the Battery Charging the BatteryPositioning the Lift Lifting the PatientPreparing the Lift for Use Lifting/Moving the Patient Attaching a Sling to the Swivel BarLifting/Moving the Patient Transferring the Patient Transferring to a Commode Chair Transferring to a Commode ChairTransferring to a Standard Commode Transferring to a WheelchairTransferring to a Wheelchair Troubleshooting Symptoms Faults SolutionMaintenance Maintenance Safety Inspection ChecklistLubricating the Lift Lubricating the LiftReplacing the Electric Actuator Cleaning the Sling and the LiftDetecting Wear and Damage Checking and Tightening Mast Pivot Bolt Replacing the Swivel BarReplacing the Swivel Bar Accessories Removing the Swivel BarInstalling the Reliant Scale Installing the Reliant ScaleOperating the Scale Keypad FunctionsWeighing the Patient Replacing the Battery Calibrating the Reliant ScaleTroubleshooting Display CodesElectric Portable Patient Lift RPA6001E Limited Warranty USA

RPA600-1E specifications

The Invacare RPA600-1E is a versatile and innovative powered wheelchair designed with user comfort and mobility in mind. This model is engineered to provide individuals with a high level of independence, promoting an active lifestyle while ensuring safety and ease of use.

One of the standout features of the Invacare RPA600-1E is its advanced seating system. The chair comes equipped with a contour seating design that delivers excellent postural support, which is crucial for long-term comfort and well-being. Users benefit from a wide range of adjustments, allowing caregivers to customize the positioning based on individual needs. The breathable upholstery also contributes to overall comfort, reducing the risk of pressure sores during prolonged use.

The wheelchair incorporates the latest in battery technology, featuring high-capacity lithium-ion batteries that allow for longer ranges between charges. This enhancement is particularly beneficial for users who require a dependable chair for daily activities, providing the user with an extended travel range of up to 25 miles on a single charge. The quick charge capability ensures that the wheelchair is ready to go when needed.

For added safety, the Invacare RPA600-1E comes with innovative anti-tip technology and a robust frame design that offers stability on various terrains. The improved suspension system is another highlight, enabling smooth transitions over bumps and curbs, which enhances the user experience during outdoor excursions.

Another important aspect is the intuitive joystick control, which allows for precise maneuvers in tight spaces. The joystick is easy to operate, enabling users to navigate with confidence in both indoor and outdoor environments. There are additional customizable features such as programmable speed settings that allow users to adjust the chair's responsiveness according to their comfort levels.

The Invacare RPA600-1E also prioritizes user safety with features such as automatic braking, providing peace of mind on inclines or uneven surfaces. This wheelchair is compatible with various accessories and support options, allowing for further customization to meet specific needs.

Overall, the Invacare RPA600-1E is a state-of-the-art powered wheelchair that prioritizes comfort, safety, and user independence, making it an excellent choice for those seeking to enhance their mobility and quality of life.
Top Page Image Contents