Invacare RPA600-1E manual Installing the Shifter Handle

Page 13

SECTION 2—ASSEMBLY

Installing the Shifter Handle

NOTE: For this procedure, refer to

FIGURE 2.3.

1.Line‐up the shifter handle threads with threaded opening in the base.

2.Turn the shifter handle clockwise and securely tighten into the base.

Shifter Handle

Threads

Opening in Base

FIGURE 2.3 Installing the Shifter Handle

Attaching the Battery Charger Mounting Bracket to the Wall

NOTE: For this procedure, refer to FIGURE 2.4.

1.Place the battery charger mounting bracket on the wall at the desired position.

2.With a pencil, mark the middle hole position.

3.Measure down 6½ inches from the pencil mark and drill one mounting hole.

4.Install the bottom mounting screw until there is an approximate 1/8‐inch gap between the screw head and the wall.

5.Put the battery charger mounting bracket onto the bottom mounting screw.

6.Drill the other two mounting holes.

7.Screw the mounting screws through the battery charger mounting bracket and into the wall. Tighten securely.

CAUTION

Make sure there is an audible click when mounting battery on the battery charger to confirm proper mounting. Otherwise, injury or damage may occur.

8.Put the battery charger in place on the mounting bracket.

9.Plug the battery charger into an electrical outlet.

NOTE: An LED will illuminate when power is applied to battery charger.

Mounting Bracket

Mounting

Screws

Bottom Mounting Screw

FIGURE 2.4 Attaching the Battery Charger Mounting Bracket to the Wall

Part No 1078988

13

Electric Portable Patient Lift - RPA600-1E

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Electric Portable Patient Lift RPA600-1E Accessories Warning Symbol LegendTable of Contents Limited Warranty Special Notes Label Location Patient Lift RPA600-1E Product ParametersReliant Scale RLS6 Using the Sling Weight LimitationGeneral Guidelines Assembling the LiftLifting the Patient Operating the LiftTransferring the Patient Performing MaintenanceAssembling the Patient Lift AssemblyAssembling the Mast to the Base Assembling the Electric Actuator Assembling the Electric Actuator to the BoomAttaching the Battery Charger Mounting Bracket to the Wall Installing the Shifter HandleIntroduction OperationOperating the Patient Lift Operating the Patient Lift Opening the Legs Closing/Opening the LegsPrimary Emergency Release Activating a Mechanical Emergency ReleaseCharging the Battery Charging the BatteryPreparing the Lift for Use Lifting the PatientPositioning the Lift Attaching a Sling to the Swivel Bar Lifting/Moving the PatientLifting/Moving the Patient Transferring the Patient Transferring to a Commode Chair Transferring to a Commode ChairTransferring to a Wheelchair Transferring to a Standard CommodeTransferring to a Wheelchair Symptoms Faults Solution TroubleshootingMaintenance Safety Inspection Checklist MaintenanceLubricating the Lift Lubricating the LiftDetecting Wear and Damage Cleaning the Sling and the LiftReplacing the Electric Actuator Replacing the Swivel Bar Checking and Tightening Mast Pivot BoltReplacing the Swivel Bar Removing the Swivel Bar AccessoriesInstalling the Reliant Scale Installing the Reliant ScaleKeypad Functions Operating the ScaleWeighing the Patient Calibrating the Reliant Scale Replacing the BatteryDisplay Codes TroubleshootingElectric Portable Patient Lift RPA6001E Limited Warranty USA

RPA600-1E specifications

The Invacare RPA600-1E is a versatile and innovative powered wheelchair designed with user comfort and mobility in mind. This model is engineered to provide individuals with a high level of independence, promoting an active lifestyle while ensuring safety and ease of use.

One of the standout features of the Invacare RPA600-1E is its advanced seating system. The chair comes equipped with a contour seating design that delivers excellent postural support, which is crucial for long-term comfort and well-being. Users benefit from a wide range of adjustments, allowing caregivers to customize the positioning based on individual needs. The breathable upholstery also contributes to overall comfort, reducing the risk of pressure sores during prolonged use.

The wheelchair incorporates the latest in battery technology, featuring high-capacity lithium-ion batteries that allow for longer ranges between charges. This enhancement is particularly beneficial for users who require a dependable chair for daily activities, providing the user with an extended travel range of up to 25 miles on a single charge. The quick charge capability ensures that the wheelchair is ready to go when needed.

For added safety, the Invacare RPA600-1E comes with innovative anti-tip technology and a robust frame design that offers stability on various terrains. The improved suspension system is another highlight, enabling smooth transitions over bumps and curbs, which enhances the user experience during outdoor excursions.

Another important aspect is the intuitive joystick control, which allows for precise maneuvers in tight spaces. The joystick is easy to operate, enabling users to navigate with confidence in both indoor and outdoor environments. There are additional customizable features such as programmable speed settings that allow users to adjust the chair's responsiveness according to their comfort levels.

The Invacare RPA600-1E also prioritizes user safety with features such as automatic braking, providing peace of mind on inclines or uneven surfaces. This wheelchair is compatible with various accessories and support options, allowing for further customization to meet specific needs.

Overall, the Invacare RPA600-1E is a state-of-the-art powered wheelchair that prioritizes comfort, safety, and user independence, making it an excellent choice for those seeking to enhance their mobility and quality of life.
Top Page Image Contents