Invacare RPA600-1E manual Charging the Battery

Page 18

SECTION 3—OPERATION

Charging the Battery

NOTE: For this procedure, refer to FIGURE 3.5.

NOTE: Invacare recommends the battery be recharged daily to prolong battery life.

NOTE: An audible alarm will sound when battery is low.

1.Lift up on the handle on the back of the battery.

2.Lift the battery up and away from the control box.

CAUTION

Make sure there is an audible click when mounting battery on the battery charger to ensure proper mounting. Otherwise, injury or damage may occur.

3.Place the battery on the battery charger. Push the top of the battery against the mounting bracket until there is an audible click.

NOTE: The charge LED will illuminate. When charged, the LED will stop illuminating.

NOTE: It will take approximately four hours to charge a battery that requires a full charge.

4.Lift up on the handle on the back of the battery.

5.Lift the battery up and away from the battery charger.

CAUTION

Make sure there is an audible click when mounting battery onto the control box to ensure proper mounting. Otherwise, injury or damage may occur.

6.Place the battery on the control box. Push the top of the battery against the mounting bracket until there is an audible click.

Battery

 

Battery

 

Charger

 

(STEP 3)

 

Control Box

 

 

 

 

 

 

 

 

Handle

 

 

(STEP 6)

 

 

 

(STEPS 1, 2, 4 and 5)

 

 

 

Audible click

when properly

installed

(STEPS 3 and 6)

FIGURE 3.5 Charging the Battery

Electric Portable Patient Lift - RPA600-1E

18

Part No 1078988

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Electric Portable Patient Lift RPA600-1E Symbol Legend Accessories WarningTable of Contents Limited Warranty Special Notes Label Location Product Parameters Patient Lift RPA600-1EReliant Scale RLS6 General Guidelines Weight LimitationUsing the Sling Assembling the LiftOperating the Lift Lifting the PatientPerforming Maintenance Transferring the PatientAssembly Assembling the Patient LiftAssembling the Mast to the Base Assembling the Electric Actuator to the Boom Assembling the Electric ActuatorInstalling the Shifter Handle Attaching the Battery Charger Mounting Bracket to the WallOperation IntroductionOperating the Patient Lift Operating the Patient Lift Closing/Opening the Legs Opening the LegsActivating a Mechanical Emergency Release Primary Emergency ReleaseCharging the Battery Charging the BatteryLifting the Patient Preparing the Lift for UsePositioning the Lift Lifting/Moving the Patient Attaching a Sling to the Swivel BarLifting/Moving the Patient Transferring the Patient Transferring to a Commode Chair Transferring to a Commode ChairTransferring to a Standard Commode Transferring to a WheelchairTransferring to a Wheelchair Troubleshooting Symptoms Faults SolutionMaintenance Maintenance Safety Inspection ChecklistLubricating the Lift Lubricating the LiftCleaning the Sling and the Lift Detecting Wear and DamageReplacing the Electric Actuator Checking and Tightening Mast Pivot Bolt Replacing the Swivel BarReplacing the Swivel Bar Accessories Removing the Swivel BarInstalling the Reliant Scale Installing the Reliant ScaleOperating the Scale Keypad FunctionsWeighing the Patient Replacing the Battery Calibrating the Reliant ScaleTroubleshooting Display CodesElectric Portable Patient Lift RPA6001E Limited Warranty USA

RPA600-1E specifications

The Invacare RPA600-1E is a versatile and innovative powered wheelchair designed with user comfort and mobility in mind. This model is engineered to provide individuals with a high level of independence, promoting an active lifestyle while ensuring safety and ease of use.

One of the standout features of the Invacare RPA600-1E is its advanced seating system. The chair comes equipped with a contour seating design that delivers excellent postural support, which is crucial for long-term comfort and well-being. Users benefit from a wide range of adjustments, allowing caregivers to customize the positioning based on individual needs. The breathable upholstery also contributes to overall comfort, reducing the risk of pressure sores during prolonged use.

The wheelchair incorporates the latest in battery technology, featuring high-capacity lithium-ion batteries that allow for longer ranges between charges. This enhancement is particularly beneficial for users who require a dependable chair for daily activities, providing the user with an extended travel range of up to 25 miles on a single charge. The quick charge capability ensures that the wheelchair is ready to go when needed.

For added safety, the Invacare RPA600-1E comes with innovative anti-tip technology and a robust frame design that offers stability on various terrains. The improved suspension system is another highlight, enabling smooth transitions over bumps and curbs, which enhances the user experience during outdoor excursions.

Another important aspect is the intuitive joystick control, which allows for precise maneuvers in tight spaces. The joystick is easy to operate, enabling users to navigate with confidence in both indoor and outdoor environments. There are additional customizable features such as programmable speed settings that allow users to adjust the chair's responsiveness according to their comfort levels.

The Invacare RPA600-1E also prioritizes user safety with features such as automatic braking, providing peace of mind on inclines or uneven surfaces. This wheelchair is compatible with various accessories and support options, allowing for further customization to meet specific needs.

Overall, the Invacare RPA600-1E is a state-of-the-art powered wheelchair that prioritizes comfort, safety, and user independence, making it an excellent choice for those seeking to enhance their mobility and quality of life.
Top Page Image Contents