Invacare RPA600-1E manual Closing/Opening the Legs

Page 16

SECTION 3—OPERATION

Closing/Opening the Legs

NOTE: For this procedure, refer to FIGURE 3.2.

WARNING

If the shifter handle is NOT positioned completely into its mounting slot, DO NOT use the patient lift until the shifter handle is properly seated and the legs of the patient lift are locked in place. Otherwise, injury and/or damage may occur.

WARNING

The legs of the lift must be in the maximum open position and the shifter handle locked in place for optimum stability and safety. If it is necessary to close the legs of the lift to maneuver the lift under a bed, close the legs of the lift only as long as it takes to position the lift over the patient and lift the patient off the surface of the bed. When the legs of the lift are no longer under the bed, return the legs of the lift to the maximum open position and lock the shifter handle immediately.

Closing the Legs

1.Stand at the rear of the patient lift and grasp the shifter handle with one hand and place the opposite hand on the steering handle of the mast for balance.

NOTE: The shifter handle MUST lock into its mounting slot to lock the legs in the full closed position.

2.Pull the shifter handle away from the patient lift and then to your left until it locks in the notch of the bracket (Detail “A”).

Opening the Legs

1.Stand at the rear of the patient lift and grasp the shifter handle with one hand and place the opposite hand on the steering handle of the mast for balance.

NOTE: The shifter handle MUST lock into its mounting slot to lock the legs in the full open position.

2. Pull the shifter handle away from the patient lift and then to your right (Detail “B”).

DETAIL “A” - CLOSING THE LEGS

DETAIL “B” - OPENING THE LEGS

FIGURE 3.2 Closing/Opening the Legs

Electric Portable Patient Lift - RPA600-1E

16

Part No 1078988

Image 16
Contents Electric Portable Patient Lift RPA600-1E Symbol Legend Accessories WarningTable of Contents Limited Warranty Special Notes Label Location Patient Lift RPA600-1E Product ParametersReliant Scale RLS6 Weight Limitation Using the SlingGeneral Guidelines Assembling the LiftOperating the Lift Lifting the PatientPerforming Maintenance Transferring the PatientAssembling the Patient Lift AssemblyAssembling the Mast to the Base Assembling the Electric Actuator to the Boom Assembling the Electric ActuatorInstalling the Shifter Handle Attaching the Battery Charger Mounting Bracket to the WallIntroduction OperationOperating the Patient Lift Operating the Patient Lift Closing/Opening the Legs Opening the LegsActivating a Mechanical Emergency Release Primary Emergency ReleaseCharging the Battery Charging the BatteryPreparing the Lift for Use Lifting the PatientPositioning the Lift Lifting/Moving the Patient Attaching a Sling to the Swivel BarLifting/Moving the Patient Transferring the Patient Transferring to a Commode Chair Transferring to a Commode ChairTransferring to a Standard Commode Transferring to a WheelchairTransferring to a Wheelchair Troubleshooting Symptoms Faults SolutionMaintenance Maintenance Safety Inspection ChecklistLubricating the Lift Lubricating the LiftDetecting Wear and Damage Cleaning the Sling and the LiftReplacing the Electric Actuator Checking and Tightening Mast Pivot Bolt Replacing the Swivel BarReplacing the Swivel Bar Accessories Removing the Swivel BarInstalling the Reliant Scale Installing the Reliant ScaleOperating the Scale Keypad FunctionsWeighing the Patient Replacing the Battery Calibrating the Reliant ScaleTroubleshooting Display CodesElectric Portable Patient Lift RPA6001E Limited Warranty USA

RPA600-1E specifications

The Invacare RPA600-1E is a versatile and innovative powered wheelchair designed with user comfort and mobility in mind. This model is engineered to provide individuals with a high level of independence, promoting an active lifestyle while ensuring safety and ease of use.

One of the standout features of the Invacare RPA600-1E is its advanced seating system. The chair comes equipped with a contour seating design that delivers excellent postural support, which is crucial for long-term comfort and well-being. Users benefit from a wide range of adjustments, allowing caregivers to customize the positioning based on individual needs. The breathable upholstery also contributes to overall comfort, reducing the risk of pressure sores during prolonged use.

The wheelchair incorporates the latest in battery technology, featuring high-capacity lithium-ion batteries that allow for longer ranges between charges. This enhancement is particularly beneficial for users who require a dependable chair for daily activities, providing the user with an extended travel range of up to 25 miles on a single charge. The quick charge capability ensures that the wheelchair is ready to go when needed.

For added safety, the Invacare RPA600-1E comes with innovative anti-tip technology and a robust frame design that offers stability on various terrains. The improved suspension system is another highlight, enabling smooth transitions over bumps and curbs, which enhances the user experience during outdoor excursions.

Another important aspect is the intuitive joystick control, which allows for precise maneuvers in tight spaces. The joystick is easy to operate, enabling users to navigate with confidence in both indoor and outdoor environments. There are additional customizable features such as programmable speed settings that allow users to adjust the chair's responsiveness according to their comfort levels.

The Invacare RPA600-1E also prioritizes user safety with features such as automatic braking, providing peace of mind on inclines or uneven surfaces. This wheelchair is compatible with various accessories and support options, allowing for further customization to meet specific needs.

Overall, the Invacare RPA600-1E is a state-of-the-art powered wheelchair that prioritizes comfort, safety, and user independence, making it an excellent choice for those seeking to enhance their mobility and quality of life.