Weider C670 Locate the Butterfly Cable 109. Attach, Cable Trap is oriented to hold the Cable

34. Locate the Butterfly Cable (109). Attach the	34
Cable to the Left Butterfly Arm (57) with an M8 x
43mm Shoulder Bolt (107), an M10 Small Washer			107
(95), and an M8 Nylon Locknut (108).
			109
			95
			108
				57
35. Wrap the Butterfly Cable (109) over a “V”-pulley	35		34
(86). Attach the “V”-pulley and a Large Cable		45
Trap (111) to the bracket on the Center Upright			86
(45) with an M10 x 60mm Bolt (105) and an M10
Nylon Locknut (34). Make sure the Cable Trap
is oriented to hold the Cable in the groove of
the Pulley.			111	105
			109
36. Wrap the Butterfly Cable (109) under a Pulley	36
(87). Attach the Pulley to the Double “U”-bracket
(81) with an M10 x 45mm Bolt (33) and an M10			109
Nylon Locknut (34).
		87	34
		33	81
37. Wrap the Butterfly Cable (109) over a “V”-pulley	37	111
(86). Attach the “V”-pulley and a Large Cable
Trap (111) to the other side of the bracket on the			86
Center Upright (45) with an M10 x 60mm Bolt
		105		45
(105) and an M10 Nylon Locknut (34). Make sure
the Cable Trap is oriented to hold the Cable in		109		34
the groove of the Pulley.
38. Attach the Butterfly Cable (109) to the Right	38	107
Butterfly Arm (56) with an M8 x 43mm Shoulder
Bolt (107), an M10 Small Washer (95), and an M8			109
Nylon Locknut (108).
		95
		56
		108
	17