Weider 831.159823 user manual Lubricate

14. Lubricate a 3/8” x 3” Button Head Bolt (97) and	14	Lubricate				97
both sides of two Plastic Washers (55) with		Welded				75
grease. Attach the Right Butterfly Arm (11) to the		Bushing	55			54
Butterfly Frame (9) with the Bolt, the two Plastic
		11
Washers, two Butterfly Caps (54), two 3/8”
Washers (75), and a 3/8” Nylon Jamnut (50).Do		55
not overtighten the Jamnut; the Butterfly Arm
must be able to pivot easily. Be sure the				54
indented sides of the Plastic Washers fit over
		Lubricate		75
the welded bushing in the Butterfly Arm.						9	10
				50
Repeat this step with the Left Butterfly Arm
(10).
15. Attach the Bumper (25) to the Right Leg (73) with	15
the #10 x 1” Screw (77).
					73
Press two 1 1/2” x 2” Inner Caps (23) into the		23	Lubricate
ends of the Leg Lever (4).
Lubricate a 3/8” x 2 1/2” Bolt (63) with grease.
Attach the Leg Lever (4) to the Right Leg (73)		50				25
with the Bolt and a 3/8” Nylon Jamnut (50).Do				63	77
not overtighten the Jamnut; the Leg Lever
must be able to pivot easily.		4
		23
16. Press a 2” x 2 1/2” Inner Cap (22) into the top of	16
the Leg Press Frame (30).
Lubricate a 3/8” x 3” Bolt (61) with grease. Attach						22
the Leg Press Frame (30) to the Left Base (2)
with the Bolt and a 3/8” Nylon Locknut (70).Do
not overtighten the Locknut; the Leg Press						30
Frame must be able to pivot easily.
						70
			61
					Lubricate
		2

10