45.Wrap the Low Cable (47) around a 3 1/2” Pulley (38). Attach the Pulley to the indicated bracket on the Right Base (1) with a 3/8” x 2” Bolt (62) and a 3/8” Nylon Locknut (70).
46.Wrap the Low Cable (47) around a 3 1/2” Pulley
(38).Attach the Pulley and a Cable Trap (91) to the lower set of holes in the indicated
(85)with a 3/8” x 2” Bolt (62) and a 3/8” Nylon Locknut (70). Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.
47.Wrap the Low Cable (47) around a 3 1/2” Pulley (38). Attach the Pulley and a Cable Trap (91) to the side of the Right Upright (6) with a 3/8” x
3 3/4” Bolt (84), a 3/8” Washer (75), and a 3/8” Nylon Locknut (70). Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.
48.Wrap the Low Cable (47) around a 3 1/2” Pulley (38). Attach the Pulley and a pair of Pulley Covers (92) to the Right Upright (6) with a 3/8” x
3 3/4” Bolt (84), two 3/8” Washers (75), and a 3/8” Nylon Jamnut (50). Be sure the small tabs on the Pulley Covers are on the side shown, and the Cable is between the Pulley and the rod
on the Upright.
45 |
|
|
|
|
| 38 |
|
|
| 47 |
|
| 70 |
|
|
| 1 | 62 |
|
46 |
|
|
|
| 70 |
| 85 |
|
|
| |
| 91 |
| 62 |
| 38 |
| 47 |
|
|
| |
47 |
|
|
|
84 | 47 |
|
|
|
|
| |
| 91 |
|
|
| 38 |
|
|
| 6 |
|
|
|
| 75 | 70 |
|
|
| |
48 | Small |
| |
|
| ||
| Tabs |
| |
| 75 |
|
|
84 |
|
|
|
| 92 |
|
|
| 38 |
| 75 |
| 47 | 92 | 50 |
|
| 6 |
|
18