Weider 831.159823 specification

21.Wrap the High Cable (45) around a 3 1/2” Pulley (38). Attach the Pulley at the forward hole, inside of the bracket on the Center Top Frame (14) with a 3/8” x 1 3/4” Bolt (66) and a 3/8” Nylon Locknut (70).

22.Attach the end of the High Cable (45) to the Small “U”-Bracket (79) with a 1/4” Washer (35) and a 1/4” Nylon Locknut (65).Note: Do not completely tighten the Nylon Locknut; it should be threaded only two turns onto the end of the Cable, as shown in the inset draw- ing.

Attach the Small “U”-Bracket (79) to the Weight Tube (82) with a 5/16” x 1 3/4” Bolt (69) and a 5/16” Nylon Locknut (71).Do not overtighten the Locknut; the Weight Tube should be able to pivot in the “U”-Bracket.

23.Locate the Leg Press Cable (95). Attach the Cable inside the Left Leg (36) with a 3/8” x 2 3/4” Bolt (81), two 3/8” Washers (75), two Long Spacers (80), and a 3/8” Nylon Locknut (70).

24.Wrap the Leg Press Cable (95) around a 3 1/2” Pulley (38). Attach the Pulley inside the Leg Press Frame (30) with a 3/8” x 2 3/4” Bolt (81), two 3/8” Washers (75), two 1/2” Spacers (34), and a 3/8” Nylon Locknut (70).

21		70
		70
		14
			45
		38
			66
22
	45
79	71
79
	35		45
69	65
69
	82
				65
23
			75	70
81	80
	80
			80
			95
	75
	36
24
		38	75
			75
				70
34			34
75		95
		30
81

21		70
		70
		14
			45
		38
			66
22
	45
79	71
79
	35		45
69	65
69
	82
				65
23
			75	70
81	80
	80
			80
			95
	75
	36
24
		38	75
			75
				70
34			34
75		95
		30
81

21		70
		70
		14
			45
		38
			66
22
	45
79	71
79
	35		45
69	65
69
	82
				65
23
			75	70
81	80
	80
			80
			95
	75
	36
24
		38	75
			75
				70
34			34
75		95
		30
81

21		70
		70
		14
			45
		38
			66
22
	45
79	71
79
	35		45
69	65
69
	82
				65
23
			75	70
81	80
	80
			80
			95
	75
	36
24
		38	75
			75
				70
34			34
75		95
		30
81