Weider 831.159823 user manual

33.Locate the Leg Lever Cable (96). Route the eyelet end of the Cable through the Right Leg

(73)and attach it to the Leg Lever (4) with a 5/16” x 1” Shoulder Bolt (78) and a 5/16” Nylon Locknut

34.Attach a 3 1/2” Pulley (38) inside the Right Leg (73) with a 3/8” x 2 3/4” Bolt (81), two 3/8” Washers (75), two 1/2” Spacers (34), and a 3/8” Nylon Locknut (70).

35.Route the Leg Lever Cable (96) through the Right Upright (6) and around a 3 1/2” Pulley (38). Attach the Pulley inside the Upright with a 3/8” x 2 3/4” Bolt (81), two 3/8” Washers (75), two 1/2” Spacers (34), and a 3/8” Nylon Locknut (70).

36.Wrap the Leg Lever Cable (96) around a 3 1/2” Pulley (38). Attach the Pulley and a Cable Trap (91) to the bottom set of holes in the indicated Double “U”-Bracket (56) with a 3/8” x 2” Bolt (62) and a 3/8” Nylon Locknut (70).Be sure the

Cable Trap is turned to hold the Cable in the groove of the Pulley.

33
4
71		73
	96	78
34
	70	73	38
	75
		34
			75
		34
			81
35		70
			75 34
		6	38
		96
			34
		75	81
36
		70	56
		91
			62
		38
		96

15