Weider 831.159730 user manual Pulley Plates are oriented as shown, Bracket is oriented as shown

Page 13

25.Remove both 3 1/2” Pulleys (24) from the pre-assem- bled Adjustable Pulley Plates (23).

Wrap the Ab Cable (74) around a 3 1/2” Pulley (24) in the direction shown. Attach the Pulley and a Cable Trap (25) to the top hole in the two Adjustable Pulley Plates (23) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50). Make sure the Cable Trap and the

Pulley Plates are oriented as shown.

26.Wrap the Ab Cable (74) around a 3 1/2” Pulley (24) in the direction shown. Attach the Pulley to the Small Pulley Bracket (22) with a 3/8” x 1 3/4” Bolt (57) and a 3/8” Nylon Locknut (50). Make sure the Pulley

Bracket is oriented as shown.

27.Wrap the Ab Cable (74) around a 3 1/2” Pulley (24) in the direction shown. Attach the Pulley and a Cable Trap (25) to the welded bracket on the Butterfly Base

(4)with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut

(50).Make sure the Cable Trap is oriented as shown.

25

 

 

25

24

50

54

 

 

23

74

 

26

 

50

 

 

22

 

57

 

24

 

74

27

 

54

74

24

25

4

50

13

Image 13
Contents SEARS, Roebuck and CO. Hoffman ESTATES, IL Model No Serial NoImportant Precautions Table of ContentsBefore You Begin DimensionsFour Stages of the Assembly Process AssemblyLocknuts yet Frame AssemblyPage Locknuts yet Nylon Locknut the Leg Press Lever must pivot easily Nylon Locknuts yetGroove Pin Grooves Brackets Locate and open the parts bag labeled ARM Assembly Arm AssemblyLarge Cable Trap is oriented as shown Cable AssemblySmall Pulley Bracket is oriented exactly as shown Bracket is oriented as shown Pulley Plates are oriented as shownMake sure the Cable Trap is oriented as shown Page Cable Trap is oriented as shown Remove a Pro Pulley 26 from the bag labeled Pulley BAGRemove a Pro Pulley 26 from the bag labeled Pulley BAG Page Make sure the Cable Trap is oriented as shown Page Locate and open the parts bag labeled Seat Assembly Seat AssemblyLeg Press Plate must be on the upper edge Miscellaneous AssemblyWeider Cable Diagrams Press Cable Changing the Weight Setting AdjustmentAdjusting the Leg Press Plate Trouble-shooting and Maintenance High Arm Leg Butterfly Curl Ab Pulley Weight Resistance ChartPress Lbs Leg RaisePage R0800A Part Identification Chart-Model NoQty Description Part List-Model NoExploded Drawing-Model No Model No QUESTIONS?