Weider 831.159730 user manual Locate and open the parts bag labeled Seat Assembly

Page 20

Seat Assembly

50.Locate and open the parts bag labeled “SEAT ASSEMBLY.”

Attach the Backrest (12) to the indicated holes in the Butterfly Upright (1) with two 1/4” x 2 1/2” Bolts (79) and two 1/4” Flat Washers (71).

51.Insert a 1/4” x 2 1/2” Carriage Bolt (45) through the center hole in a Seat Plate (65). Attach the Seat Plate to the Press Backrest (99) with two 1/4” x 3/4” Bolts (49).

Insert the 1/4” x 2 1/2” Carriage Bolt (45) into the indicated hole in the Butterfly Upright (2) and secure it with a 1/4” Flat Washer (71) and a 1/4” Nylon Locknut (68). Secure the other end of the Press Backrest (99) with a 1/4” x 2 1/2” Bolt (79) and a 1/4” Flat Washer (71).

20

50

 

 

 

1

 

 

 

79

12

 

71

 

 

 

 

79

51

 

 

 

 

2

 

 

79

 

 

71

99

 

 

65

49

68

 

 

71

45

 

 

Image 20
Contents Model No Serial No SEARS, Roebuck and CO. Hoffman ESTATES, ILTable of Contents Important PrecautionsDimensions Before You BeginAssembly Four Stages of the Assembly ProcessFrame Assembly Locknuts yetPage Locknuts yet Nylon Locknuts yet Nylon Locknut the Leg Press Lever must pivot easilyGroove Pin Grooves Brackets Arm Assembly Locate and open the parts bag labeled ARM AssemblyCable Assembly Large Cable Trap is oriented as shownSmall Pulley Bracket is oriented exactly as shown Make sure the Cable Trap is oriented as shown Pulley Plates are oriented as shownBracket is oriented as shown Page Remove a Pro Pulley 26 from the bag labeled Pulley BAG Cable Trap is oriented as shownRemove a Pro Pulley 26 from the bag labeled Pulley BAG Page Make sure the Cable Trap is oriented as shown Page Seat Assembly Locate and open the parts bag labeled Seat AssemblyMiscellaneous Assembly Leg Press Plate must be on the upper edgeWeider Cable Diagrams Press Cable Adjusting the Leg Press Plate AdjustmentChanging the Weight Setting Trouble-shooting and Maintenance Weight Resistance Chart High Arm Leg Butterfly Curl Ab PulleyPress Lbs Leg RaisePage Part Identification Chart-Model No R0800APart List-Model No Qty DescriptionExploded Drawing-Model No QUESTIONS? Model No