ATTACHING THE LEG LEVER TO THE LOW PULLEY STATION
To use the Leg Lever (29), the seat must be attached to the front upright (see ATTACHING AND REMOV- ING THE SEAT on page 16).
Attach the Short Cable (23) to the M10 Eyebolt (35) with a Cable Clip (53). Note: Be sure the Eyebolt is positioned vertically on the Leg Lever (29).
ATTACHING THE CURL PAD TO THE SEAT FRAME
Set the hooks on the bottom of the Curl Post (71) around the M8 x 67mm Bolt (61) in the Seat Frame (36). Secure the Curl Post to the Seat Frame with the Curl Knob (33).
ATTACHING THE LAT BAR TO THE LEG LEVER
To use the Lat Bar (54) to do curl exercises, attach the leg lever to the short cable, and the curl pad to the seat frame (see ATTACHING THE LEG LEVER TO THE LOW PULLEY STATION and ATTACHING THE CURL PAD TO THE SEAT FRAME, above).
Attach the Lat Bar (54) to the front M10 Eyebolt (35) on the Leg Lever (29) with a Chain (52) and two Cable Clips (53). Note: Be sure the Eyebolt is posi- tioned vertically on the Leg Lever (29).
53 |
| 29 |
23 |
| 35 |
|
| |
|
| 71 |
| 33 |
|
| 36 |
|
|
| 61 |
| 29 |
|
| 35 |
|
|
| 52 |
53 |
|
|
| 53 | 54 |
|
|
17