Weider user manual Part Identification CHART-WESY17011

Page 24

PART IDENTIFICATION CHART—WESY17011

R0802B

M6 x 16mm Screw (18)

M6 Nylon Locknut (2)

M6 x 50mm Screw (24)

M8 Nylon Locknut (3)

M6 x 50mm Carriage Bolt (38)

M10 Nylon Locknut (21)

M6 x 63mm Screw (43)

M6 Washer (10)

M8 x 63mm Bolt (22)

M8 Washer (8)

M8 x 63mm Carriage Bolt (1)

M10 Washer (9)

Cable Clip (53)

M10 Eyebolt (35)

Image 24

Contents QUESTIONS? Model No. WESY17011 Serial NoCustomer HOT Line Table of Contents Important Precautions Dimensions Before YOU BeginAssembly Make Assembly Easier for YourselfFrame Assembly Each Carriage Bolt. Do not tighten the Nylon Locknuts yetARM Assembly Tighten the Nylon Locknuts used in stepsCable Assembly Cable Trap is positioned to hold the Cable in place Bolt and the Nylon Locknut are tight Parts are oriented as shown. Do not tighten Nylon Locknuts yetUpright 42. See the inset drawing. Be sure Inset shows viewInset shows view Seat Assembly Tighten the Nylon Locknut the Leg Lever Must pivot freelyPage Page Adjustment Adding Weights to the Weight CarriageAttaching and Removing the Seat Attaching the LEG Lever to the LOW Pulley Station Attaching the Curl PAD to the Seat FrameAttaching the LAT BAR to the LEG Lever Weight Resistance Chart Weight on Press ARM Butterfly ARM LOW Pulley High PulleyLbs LEG LeverTROUBLE-SHOOTING and Maintenance Tightening the CablesCable Diagram Long CableTOP View Long U-Bracket Short CablePage Part LIST-Model No. WESY17011 Qty DescriptionR0802B Part Identification CHART-WESY17011 Page 19mm Round Inner Cap 25mm Retainer Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT