15. Attach a Press Arm (7) to one side of the Press | 15 |
|
Frame (12) with two M8 x 63mm Bolts (39) and |
| |
|
| |
two M8 Nylon Locknuts (40). |
|
|
Attach the other Press Arm (7) to the Press | 39 | 7 |
Frame (12) in the same manner. |
|
|
| 7 | 40 |
|
| |
| 12 |
|
16. Lubricate both axles on the Butterfly Frame (3). | 16 |
|
|
| |
Identify the Right Fly Arm (5) and the Left Fly Arm |
|
|
(6). |
|
|
| 3 |
|
Slide the Left Fly Arm (6) onto the indicated axle. |
| Lubricate Axle |
Note: Do not to confuse the Left Fly Arm with |
| |
|
| |
the Right Fly Arm (5). Make sure that the upper |
|
|
end of the Left Fly Arm is behind the indicated |
|
|
bracket on the Butterfly Frame (3). | 5 |
|
|
| |
IMPORTANT NOTE: Before assembling the | Bracket | 45 |
25mm Retainers (45) used in this step, make |
| 46 |
sure that you thoroughly understand the step. |
| |
The Retainers can be assembled only once. If |
| 6 |
they must be removed, you will need to order |
|
|
new Retainers. |
|
|
Tap two 25mm Retainers (45) and a 25mm |
|
|
Round Outer Cap (46) onto the axle. Make sure |
|
|
that the teeth on the Retainers bend toward |
|
|
the Round Outer Cap, as shown in the inset |
|
|
drawing. |
|
|
Attach the Right Fly Arm (5) in the same man- |
| Axle |
| 45 | |
ner. |
| |
|
| |
|
| 46 |
| 10 |
|