Weider WESY26331 user manual

Page 29

M8 x 67mm Bolt (55)

M8 x 63mm Carriage Bolt (49)

M8 x 70mm Carriage Bolt (77)

M8 x 69mm Shoulder Bolt (43)

M10 x 80mm Bolt (71)

M10 x 82mm Bolt (66)

M10 x 92mm Bolt (76)

M10 x 97mm Bolt (95)

M10 x 120mm Bolt (74)

M8 x 152mm Bolt (67)

M10 x 195mm Bolt (52)

Image 29

Contents Customer HOT Line QUESTIONS?Model No. WESY26331 Serial No Table of Contents Important Precautions Decal1 Before YOU BeginMake Assembly Easier for Yourself AssemblyLocknuts yet Frame AssemblyDo not tighten the Locknuts yet Weights Tighten the Locknuts yet Assembly Ner Repeat this step with the Right Fly Arm Cable AssemblyCable Trap is positioned to hold the Cable Place Be oriented to hold the Cable in the groove PulleyLocknut 42. The Cable must be routed from Direction shown Identify the Rear Cable 87-this is the shortIdentify the Press Cable 88-this is Page Not tighten the Locknut until completing step Route the Press Cable 88 around the 90mm End with two Holes should Be down Post Nylon Locknut Locate and open the parts bag labeled Seat AssemblyM6 Nylon Locknut Attaching the Accessories AdjustmentsChanging the Weight Setting Attaching the AB Strap to the AB Pulley Station Adjusting the LEG Press PlateAttaching and Removing the Seat Attaching the LEG Lever to the LOW Pulley StationPlates Weight Resistance ChartRear Cable 87 can be tightened in the same manner MaintenanceTightening the Cables Cable Diagrams High Cable High Pulley-1 Weight Stack-5 Rear Cable Top Frame R0904A Part Identification CHART-Model No. WESY26331Page Qty Description Part LIST-Model No. WESY26331Exploded DRAWING-Model No. WESY26331 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty