Weider WESY26331 user manual Not tighten the Locknut until completing step

35. Route the Press Cable (88) over a 90mm Pulley	35
(82). Attach the Pulley and a Cable Trap (80) to
the indicated hole in the Press Frame (12) with			66
an M10 x 82mm Bolt (66), an M10 Washer (38),
and an M10 Nylon Locknut (42).			88
			38
		12	82
			42 80
36. Wrap the Press Cable (88) around a “V”-pulley	36
(81). Attach the “V”-pulley to the lower bracket on
the Leg Press Upright (4) with an M10 x 57mm
Bolt (91) and an M10 Nylon Locknut (42).
			4
			81
			88
		42
			91
37. Wrap the Press Cable (88) around a 90mm	37
Pulley (82). Attach the Pulley and a Cable Trap
(80) to the Leg Press Arm (9) with the M10 x
120mm Bolt (74).
Slide another 90mm Pulley (82) with a Cable Trap			82	42
(80) onto the M10 x 120mm Bolt (74). Hand tight-
en an M10 Nylon Locknut (42) onto the Bolt. Do				80
not tighten the Locknut until completing step
			9
39.		88
	74	80	82
38. Wrap the Press Cable (88) around a “V”-pulley	38
(81). Attach the “V”-pulley and a Large Cable			83
Trap (83) to the bracket on the Front Seat Frame			65
(8) with an M10 x 60mm Bolt (65) and an M10
Nylon Locknut (42). Make sure that the Large			81
Cable Trap is turned to hold the Cable in place
and that the Cable and Pulley move smoothly.
				8
		88
			42

16