Weider WESY26331 user manual Cable Diagrams

Page 26
Low Cable (86)

CABLE DIAGRAMS

The cable diagrams on this page and the next page show the proper routing of the High Cable (85), the Low Cable (86), the Rear Cable (87), the Press Cable (88), and the Butterfly Cable (89). Use the diagrams to be sure that the cables have been assembled correctly. The starting and ending points of each cable have been labeled. The numbers show the proper route for each cable. IMPORTANT: If the cables have not been correctly rout- ed, the weight system will not function properly and damage may occur.

Press Cable (88)

1—Long “U” Bracket

4

 

5

 

7

6

 

 

11

 

8

2

12

 

3

 

9

 

 

10

 

Leg Press—13

 

26

3

Ab Pulley—1

2

4—Low Pulley

Butterfly Cable (89)

4

5—Left Fly Arm

2

 

1—Right Fly Arm

3

 

Image 26
Contents Customer HOT Line QUESTIONS?Model No. WESY26331 Serial No Table of Contents Important Precautions Before YOU Begin Decal1Assembly Make Assembly Easier for YourselfLocknuts yet Frame AssemblyDo not tighten the Locknuts yet Weights Tighten the Locknuts yet Assembly Ner Cable Assembly Repeat this step with the Right Fly ArmBe oriented to hold the Cable in the groove Pulley Cable Trap is positioned to hold the Cable PlaceIdentify the Rear Cable 87-this is the short Locknut 42. The Cable must be routed from Direction shownIdentify the Press Cable 88-this is Page Not tighten the Locknut until completing step Route the Press Cable 88 around the 90mm End with two Holes should Be down Post Locate and open the parts bag labeled Seat Assembly Nylon LocknutM6 Nylon Locknut Attaching the Accessories AdjustmentsChanging the Weight Setting Attaching and Removing the Seat Adjusting the LEG Press PlateAttaching the AB Strap to the AB Pulley Station Attaching the LEG Lever to the LOW Pulley StationWeight Resistance Chart PlatesRear Cable 87 can be tightened in the same manner MaintenanceTightening the Cables Cable Diagrams High Cable High Pulley-1 Weight Stack-5 Rear Cable Top Frame Part Identification CHART-Model No. WESY26331 R0904APage Part LIST-Model No. WESY26331 Qty DescriptionExploded DRAWING-Model No. WESY26331 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty