18.While a second person is holding the Rear Top Frame
(55)in position, secure it to the Left Rear Upright (25) with two M10 x 78mm Bolts (33), a Small Support Plate (16) and two M10 Nylon Locknuts (11). Note:
Do not tighten the Nylon Locknuts yet.
Secure the Rear Top Frame (55) to the Right Rear Upright (68) with two M10 x 78mm Bolts (33), a Small Support Plate (16) and two M10 Nylon Locknuts (11).
Note: Do not tighten the Nylon Locknuts yet.
19.While a second person is holding the Crossbar (20) in position, secure it to the Left Top Frame (13) with two M10 x 78mm Bolts (33), a Large Support Plate (70) and two M10 Nylon Locknuts (11). Note: Do not tighten the Nylon Locknuts yet.
Secure the Crossbar (20) to the Right Top Frame (29) with two M10 x 78mm Bolts (33), a Large Support Plate (60) and two M10 Nylon Locknuts (11). Go back and tighten all Nylon Locknuts (11) used to assemble the cage (steps 10 through 19).
12
18 |
|
33 | 16 |
| |
| 55 |
| 11 |
| 68 |
| 11 |
| 16 |
| 33 |
| 25 |
19 |
|
|
| 11 |
|
33 | 60 |
|
|
| |
| 20 | 13 |
|
| 11 |
| 29 |
|
|
| 60 |
|
| 33 |