Weider WEBE96491 manual Locknuts yet

Page 9

11.Identify the Left Rear Upright (25) which is the only Upright with weight tubes on it.

Press a 48mm Round Inner Cap (54) into the end of each weight tube.

Place the lower end of the Left Rear Upright (25) inside the bracket on the Left Base (2) and secure it with two M10 x 78mm Bolts (33) and two M10 Nylon Locknuts (11). Note: Do not tighten the Nylon

Locknuts yet.

12.Identify the Right Rear Upright (68) which is the only Upright with the indicated hole on the lower end.

Place the lower end of the Right Rear Upright (68) inside the bracket on the Right Base (7) and secure it with two M10 x 78mm Bolts (33) and two M10 Nylon Locknuts (11). Note: Do not tighten the Nylon

Locknuts yet.

11
	25
54	Weight
	Weight
	Tube
17	54
17
	11
33
	2
12
68
Hole
11
33
7

9

Image 9

Contents Customer HOT Line Model No. WEBE96491 Serial NoMon.ÐFri., 6 a.m.Ð6 p.m. MST Patent PendingTable of Contents Important Precautions Before You Begin Assembled DimensionsRight Side Left SidePart Identification Chart Model No. WEBE96491 R0899A Assembly Lubricate Page Locknuts yet Page Do not tighten the Nylon Locknuts yet Do not tighten the Nylon Locknuts yet Page Using the Weight Rests Adjusting the Weight BenchWeight Rests snap into place around the Uprights Adjusting the Foam PadsAdjusting the Backrest Setting UP the Bench for Squat ExercisesAttaching Weights to the LEG Lever Securing Weights with the Spring Clips Attaching Weights to the Weight CarriageAttaching the LAT BAR to the Pulley Station Attaching the Curl PostExercise Guidelines Staying Motivated Cooling DownDate Exercise Weight Sets RepsAerobic Exercise Thursday Aerobic Exercise DateQty Description Part List Model No. WEBE96491WEBE96491 Remove this Part LIST/EXPLODED Drawing from the Manual Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT