Continued
4 Select a group and track to start | Basic Disc Operations |
|
| |||
| E |
|
|
|
| |
playing. | PR SET |
|
|
|
| |
While playing a disc, you can do the following operations. | ||||||
1) Turn ¢ / 4 (or press ¢ (¡) / | ||||||
|
|
|
|
| ||
4 (1) on the remote control) to | To exchange discs during playback of another disc | |||||
select a group you want, then press | ||||||
CD 3¥8. | Press 0 corresponding to a disc (CD1 – CD5), not playing or | |||||
The track number starts flashing. | selected currently, to eject and exchange the disc. |
| ||||
| CD1 | CD2 | CD3 | CD4 | CD5 | |
| CD |
|
|
|
|
English
Track number flashes
2)Turn ¢ / 4 (or press ¢ (¡) / 4 (1) on the remote control) to select a track you want to start playback with, then press CD 3¥8.
Track title**
Group number | Elapsed playing time |
Track number
**If the entire track title cannot be shown (exceeds 10 characters), the title scrolls.
Playback starts with the selected track of the selected group.
To stop playing, press 7.
To remove the disc, press 0 for the corresponding disc tray.
If you exchange discs during play, the current play will not stop until all discs you have exchanged are played.
To stop play for a moment
Press CD 3¥8. | CD |
While pausing, the elapsed playing time |
|
flashes on the display. |
|
To resume playing, press CD 3¥8 again.
To go to another track
For audio CDs: Before or during play
For MP3 discs: During play
Turn ¢ / 4 (or press ¢ (¡) / |
| E |
|
| PR SET |
4(1) on the remote control).
•¢ (or ¢ (¡)):
Skips to the beginning of the next or succeeding tracks.
•4 (or 4 (1)):
Goes back to the beginning of the current or previous tracks.
To locate a particular point in a track
During play, press and hold ¡ or |
|
1 (or ¢ (¡) / 4 (1) on |
|
the remote control). | I |
| T |
| U |
| N |
/BEEP | N |
• ¡ (or ¢ (¡)): | G |
| |
disc. |
|
• 1 (or 4 (1)): |
|
Disc playback sequence
When discs* in more than one tray are loaded on the disc trays, they are played in sequence as follows:
Ex.: When CD2 is pressed:
CD2 ] CD3 ] CD4 ] CD5 ] CD1 (then stops)
*When no disc is loaded on the tray, that disc number is skipped.
To go to another track directly using the number buttons
On the remote control ONLY:
Pressing the number button(s) before or during play allows you to start playing the track number you want.
Ex.: For track number 5, press 5.
FM MODE
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10 three times, then 2.
For track number 132, press +10 thirteen times, then 2.
16