English
Programming the Playing Order of the Tracks —Program Play
You can arrange the playing order of the tracks before you start playing. You can program up to 100 tracks.
• To use Repeat Play (see page 19) for Program Play, press |
REPEAT after starting Program Play. Only REPEAT 1 and |
4 Select a track from the selected disc in step 3.
•Program step numbers exceeding 100 cannot be programed.
•When making programs from MP3 discs, the unit only recognizes tracks like audio CD. You cannot make programs using group numbers.
REPEAT ALL can be selected for Program Play. |
• There is a time limit in doing the following steps. If the setting |
is canceled before you finish, start from step 2 again. |
1 Load discs.
•If the current playing source is not the CD player, press CD 3¥8, then 7 before going to the next step.
2 Activate Program Play.
On the unit:
Press CD PLAY MODE repeatedly CD PLAY MODE until “CD PROGRAM” appears 
on the display.
•Each time you press the button, the play mode changes as follows:
On the unit: |
| PRESET |
|
Turn ¢ / 4 to select the track number, then press
SET/DISPLAY.
On the remote control:
Press the number buttons.
•For how to use the number buttons, see “To go to another track directly using the number buttons” on page 16.
SET
/DISPLAY
FM MODE
CD PROGRAM |
| CD RANDOM |
|
Total track number and 
total playing time (Continuous Play)
5 Program other tracks you want.
•To program tracks from the same disc, repeat step 4.
•To program tracks from a different disc, repeat steps 3 and 4.
On the remote control:
Press PROGRAM so that |
|
|
|
|
| |
|
|
|
|
| ||
5 |
| PROGRAM | ||||
“CD PROGRAM” appears | PROGRAM | CANCEL | ||||
|
| REC | TAPE | |||
on the display. |
|
| ||||
DOM START/STOP | ||||||
|
|
|
|
|
| |
The PROGRAM indicator lights up on the display.
•If a program has been stored in memory, the program is called up.
6 Press CD 3¥8. | CD |
The tracks are played in the order you have programed.
•If the playing disc is an MP3 disc, the MP3 indicator lights up.
To stop playing, press 7.
To exit from Program Play, press CD PLAY MODE repeatedly until the PROGRAM indicator goes off (or press PROGRAM on the remote control) after playback stops.
3 Press one of the disc number buttons (CD1 – CD5) to select the disc you want.
CD1 |
| CD2 |
| CD3 |
| CD4 |
| CD5 |
|
|
|
|
Track number Program step number
Disc number
•If you try to program a 101st track, “CD FULL” appears on the display.
•If you have tried to program a track from an empty tray, “NO READ # (number)” or “NO DISC # (number)” will appear on the display for 2 seconds.
•If you have tried to program a track number that does not exist, it is ignored.
•If you try to open a disc tray during Program Play, the disc tray does not come out. Open disc trays after canceling Program Play.
17