ATTACHING THE LAT BAR
Attach the Lat Bar (37) to the Cable (39) with a Cable Clip (41). Rest the Lat Bar on the lat bar rest on the Lat Tower (40).
WARNING: Always remove the Lat Bar (37) when performing an exer- cise that does not require it.
ADJUSTING THE WEIGHT RESTS
The Weight Rests (51) can be adjusted to three heights. To move the Weight Rests, disengage the locking pins and remove the Weight Rest from the Uprights (1). Reinsert the Weight Rests into a set of holes in the Uprights. Rotate the Weight Rests to the locked position, with the locking pin wrapped around the Upright.
WARNING: Always insert the Weight Rests (51) into the Uprights (1) at the same height.
| 39 |
| 41 |
| 37 |
| Lat Bar |
| Rest |
40 |
|
| 1 |
51 | 1 |
| 51 |
Locking |
|
Pin |
|
| Locking |
| Pin |
12