Weider WESY59930 user manual Cable Diagram, Using the Removable Crossbows, Long Cable

Page 16

USING THE REMOVABLE CROSSBOWS

The Removable Crossbows (36, 67) can be used to exercise apart from the resistance system, as shown in the video or on the exercise guide. To remove a Crossbow, pull it out of the Crossbow Spacer (35).

To replace the Removable Crossbows (36, 67), slide them into the Crossbow Spacer (35) from the side shown, so that the arrows on the rings point toward the Crossbow Spacer. Make sure the rings are pushed against the Crossbow Spacer.

67

36

 

35

 

Rings

CABLE DIAGRAM

The cable diagram shows the proper routing of the Long Cable (80). Use the diagram to make sure that the cable has been assembled correctly. If the cable has not been correctly routed, the resistance system will not function properly and damage may occur. The numbers show the correct route for the cable.

 

 

Long Cable (80)

5

 

 

7

4

 

 

3

 

6

 

 

 

 

2

 

 

1

16

Image 16
Contents Model No. WESY59930 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Dimensions Before YOU BeginAssembly Make Things Easier for YourselfPage Locknuts the Eyebolts must be able to rotate freely Locknut the Leg Lever must be able to pivot easilyKnob is aligned with the slot in the Seat Carriage, as shown Page Locate the Long Cable 80. Insert one end Make sure the indicated rings are on the sideEdge of the Pulley Guard is on the side shown Arm 22. Be sure the Cable is on the indicated Side of the welded rod in the Swivel ArmOnto the hook welded to the bottom of the Bench Rail Adjusting the Seat AdjustmentsAttaching the High Pulleys and LEG Lever Attaching the Accessories Adjusting the ResistanceAdjusting the Backrest Storing the Resistance SystemUsing the Removable Crossbows Cable DiagramLong Cable Exercise Guidelines Cooling Down Muscle ChartStaying Motivated Date Exercise Resistance Sets RepsAerobic Exercise Thursday Aerobic Exercise DateLimited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part Identification Chart Page Part LIST-Model No. WESY59930 Qty DescriptionExploded DRAWING-Model No. WESY59930