Weider WESY49200 user manual HOW to USE the Home GYM System, Changing the Weight Setting

Page 22

HOW TO USE THE HOME GYM SYSTEM

The instructions below describe how each part of the home gym system can be adjusted. Refer to the exercise poster accompanying this manual to see how the home gym system should be set up for each exercise.

IMPORTANT: When attaching the lat bar or nylon strap, make sure that the attachments are in the cor- rect starting position for the exercise to be performed. If there is any slack in the cables or chain as an exercise is performed, the effectiveness of the exercise will be reduced.

CHANGING THE WEIGHT SETTING

The weight system features two weight stacks. The front weight stack is connected to the upper and lower pulleys, the press arm, and the butterfly arms. The rear weight stack is connected to the military press arm, assist arm, and leg press.

To change the weight setting of either weight stack, insert a Weight Pin (26) under the desired Weight (25). Insert the Weight Pin until the bent end of the Weight Pin is touching the Weights, and turn the bent end downward. The weight setting of either weight stack can be changed from 6.5 pounds to 106.5 pounds, in increments of 12.5 pounds. Note: Due to the cables and pulleys, the amount of resistance at each exercise station may vary from the weight setting. Use the WEIGHT RESISTANCE CHART on page 24 to find the approximate amount of resis- tance at each weight station.

ATTACHING THE LAT BAR OR NYLON STRAP TO THE HIGH PULLEY STATION

Attach the Lat Bar (54) to the High Cable (58) with a Cable Clip (53). For some exercises, the Chain (52) should be attached between the Lat Bar and the High Cable with two Cable Clips. Adjust the length of the

Chain between the Lat Bar and the High Cable so the Lat Bar is in the correct starting position for the exercise to be performed.

The Nylon Strap (39) can be attached in the same manner.

ATTACHING THE LAT BAR OR NYLON STRAP TO THE LOW PULLEY STATION

Attach the Lat Bar (54) to the Low Cable (23) with a Cable Clip (53). For some exercises, the Chain (52) should be attached between the Lat Bar and the Low Cable with two Cable Clips. Adjust the length of the

Chain between the Lat Bar and the Low Cable so the Lat Bar is in the correct starting position for the exercise to be performed.

The Nylon Strap (39) can be attached in the same manner.

26

 

25

 

25

 

 

26

53

52

 

58

53

 

54

 

39

23

 

53

52

 

53

 

39

 

54

22

 

Image 22
Contents Table of Contents QUESTIONS?Important Precautions Dimensions Before YOU BeginFollowing Tools not Included are Required for Assembly AssemblyFrame Assembly Òframe ASSEMBLY.ÓNylon Locknuts yet Tighten all Nylon Locknuts used in steps 1Ð5 Pin grooves are all on the same side Each stack of WeightsWeights 25 until is complete Be careful not to tip either stackTube is sitting in the pin grooves in the top Weight Frame Assembly ARM Assembly Òarm ASSEMBLY.ÓDo not tighten the Nylon Locknut yet 101 Bracket 105 106 107 ARM Assembly Cable Assembly Long Cable Trap is positioned to hold Cable in place Nylon Locknut the Pulley Bracket Must be able to move freely102 Locate the Low Cable 23. Route the Low Pulley and the crossbar on the PressLocate the Military Press Cable 72. Attach Cable Assembly Must be inserted from the side shown Locate the Leg Press Cable 99. Attach Seat Assembly Òseat ASSEMBLY.ÓSeat Assembly Seat Assembly Decal HOW to USE the Home GYM System Changing the Weight SettingAttaching and Removing the Seat Adjusting the LEG Press PlateAttaching the LEG Lever to the LOW Pulley Station Weight Resistance Chart PlatesTROUBLE-SHOOTING and Maintenance Tightening the CablesHigh Cable Cable DiagramsHigh Cable 58 and Low Cable Low CableMilitary Press Cable 72 and Leg Press Cable 8ÑPivot Arm Leg Press CablePage 16 x 3 Bolt Page Part LISTÑModel No. WESY49200 Qty DescriptionExploded DRAWINGÑModel No. WESY49200 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

WESY49200 specifications

The Weider WESY49200 is a multifaceted home gym system that stands out for its versatility, compact design, and user-friendly features. Aimed at fitness enthusiasts seeking to build strength and maintain a healthy lifestyle at home, the WESY49200 offers a wide range of exercises, making it suitable for users of all levels.

One of the key features of the Weider WESY49200 is its combination of resistance options. This system typically employs a combination of traditional weight plates and advanced resistance band technology, allowing users to customize their workouts. This flexibility addresses the specific needs of each user, enabling them to adjust the resistance according to their strength and fitness goals.

The design of the Weider WESY49200 is characterized by its compact footprint, making it an ideal choice for those with limited space. The gym system incorporates vertical space efficiently, allowing users to perform a variety of exercises without needing a large area. The sleek design is not only space-saving but also visually appealing, fitting seamlessly into modern home environments.

In terms of exercise variations, the Weider WESY49200 allows for over 50 different exercises targeting various muscle groups. This includes options for upper body workouts, such as chest presses, lat pull-downs, and bicep curls, as well as lower body exercises like leg extensions and calf raises. The diverse exercise possibilities ensure a comprehensive workout program that can effectively engage all major muscle groups.

Another significant technology incorporated into the Weider WESY49200 is its ergonomic design. The equipment comes with padded leg and seat supports that enhance comfort during workouts. This consideration for user comfort not only makes exercise more enjoyable but also reduces the risk of injury, allowing users to focus on their training without distractions.

Moreover, the Weider WESY49200 often includes a range of adjustable components, including a seat that can be modified to accommodate different heights and exercise types. This adaptability ensures that users can maintain proper form and posture, further enhancing the effectiveness of their workouts.

In summary, the Weider WESY49200 stands as a robust choice for anyone looking to engage in full-body training at home. With its impressive variety of exercises, compact design, and thoughtful ergonomic features, this home gym equipment is well-suited to meet the demands of diverse fitness enthusiasts. Whether you are just starting on your fitness journey or are looking to enhance your existing routine, the Weider WESY49200 provides the tools necessary to reach your goals effectively.