Electrolux 72630 Programme option buttons, Tions cannot be selected any buttons pressed do not

Page 12

Operating Instructions

Programme option buttons

The programme options buttons are used to adapt the washing program to suit the degree of soiling of the washing. Programme options are not re- quired for normally soiled washing.

The different functions can be combined together depending on the programme.

PRE WASH

Warm pre-wash before the main washing cycle which follows on automatically. There is a short spin between the pre-wash and the COTTONS/ LINEN main wash. The EASY-CARES and DELICATES main wash follow the pre-wash without a spin.

SOAKING

Approx. 50 minutes at 30°C. Can be extended to a maximum of 10 hours and approx. 20 minutes with the DELAY TIMER button. The main washing programme then follows automatically.

QUICK WASH

Shortened main washing cycle for lightly soiled washing.

	STAIN
	For treating heavily soiled or stained washing. In-wash stain treatment
	is washed in from the compartment at the optimal point in the pro-
	gramme cycle. May only be used for wash temperatures from 40°C as
	stain removers only become effective at higher temperatures.
3	When the WOOL/P (hand wash) setting is chosen, the programme op-
	tions cannot be selected (any buttons pressed do not

have any effect).

12

Image 12

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Page Safety Prior to initial start-upIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Stain removersControl panel Programme selectorWool P hand wash Stain removers only become effective at higher temperatures Programme option buttonsShortened main washing cycle for lightly soiled washing Tions cannot be selected any buttons pressed do notWhat does Update mean? Consumption data and wash timesBefore the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Setting the Washing Programme Changing the spin speed/Selecting Rinse HoldSetting the delay timer / soaking duration Delay timer Soaking durationOpening and closing the door Loading the washingSee Programme Tables for maximum loads Lights up green Flashes red YesIf using liquid detergent / tablets Add detergent / conditionerConditioners Adding detergent / conditionerIf the delay timer has been set Starting the washing programmeWashing Programme Progress Programme progress displayChange the washing programme Changing or stopping the wash programmeSelecting the programme options Changing the Spin SpeedWashing cycle is complete/Removing the washing Electricity mainsProgramme tables WashingSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpGency emptying Trouble Shooting What to do ifLimescale or is faulty It repaired if necessary Water tap is closed Open the water tap No water flowsNot been removed Machine is not levelClean the detergent dis Contact your local ServiceFault code E20 Cial accessoryTap is blocked Clean the filter Rinsing water is Cloudy Content Detergent if necessaryLights up green Door High water level or a highIf the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Child Safety Feature Cancelling the child safety featureWashing programme can be StartedInstallation and connection instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Cover the hole with the cap G Caps D 2 each and G 1 eachInstallation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceElectrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Page Page Page Index Multi-display , 19, 22, 30Service & Spare Parts 0870 5 929 Help us to help youPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG