Electrolux 72630 manual Cover the hole with the cap G, Caps D 2 each and G 1 each

Page 40

Installation and connection instructions

3	The special spanner (E) and the
	caps (D) (2 each) and (G) (1 each)

are supplied with it.

3.Remove the two screws (A) with the special spanner.

4.Remove the 4 screws (B).

5.Remove the transit bar (C).

6.Screw the 4 screws (B) back in for safe keeping.

7.Close the 2 large holes with the caps (D).

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

8.Remove the screw F, including the compression spring with the spe- cial spanner E.

9.Cover the hole with the cap G.

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

40

Image 40

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Stain removersControl panel Programme selectorWool P hand wash Stain removers only become effective at higher temperatures Programme option buttonsShortened main washing cycle for lightly soiled washing Tions cannot be selected any buttons pressed do notWhat does Update mean? Consumption data and wash timesPreparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Setting the Washing Programme Changing the spin speed/Selecting Rinse HoldSetting the delay timer / soaking duration Delay timer Soaking durationOpening and closing the door Loading the washingSee Programme Tables for maximum loads Lights up green Flashes red YesIf using liquid detergent / tablets Add detergent / conditionerConditioners Adding detergent / conditionerIf the delay timer has been set Starting the washing programmeWashing Programme Progress Programme progress displayChange the washing programme Changing or stopping the wash programmeSelecting the programme options Changing the Spin SpeedWashing cycle is complete/Removing the washing Electricity mainsProgramme tables WashingSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpGency emptying Trouble Shooting What to do ifLimescale or is faulty It repaired if necessary Water tap is closed Open the water tap No water flowsNot been removed Machine is not levelClean the detergent dis Contact your local ServiceFault code E20 Cial accessoryTap is blocked Clean the filter Rinsing water is Cloudy Content Detergent if necessaryLights up green Door High water level or a highIf the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Child Safety Feature Cancelling the child safety featureWashing programme can be StartedInstallation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Cover the hole with the cap G Caps D 2 each and G 1 eachInstallation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Great Britain Page Page Page Index Multi-display , 19, 22, 30Service & Spare Parts 0870 5 929 Help us to help youPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG