Electrolux 72630 manual Installation of the appliance, Transporting the appliance

Page 39

Installation and connection instructions

Installation of the appliance

Transporting the appliance

•Do not place the washing machine on its front or on its right hand side (viewed from the front). This is to prevent the possibility of the electronic components becoming wet.

•Never transport the unit without the transport packaging and bolts/ bars. Do not remove the transport packaging until the appliance is at the installation location. Transporting the unit without the transport packaging can damage it.

•Never lift the appliance by the door.

•When transporting the unit with a sack trolley: Attach the sack trol- ley at the side only.

Remove transport packaging

Important! It is essential to re- move the transport packaging be- fore putting the appliance into operation. Keep all parts of the transport packaging in a safe place for future use.

0 1. Open both hose holders on the appliance's rear side and remove the hoses and mains cable.

2.Pull both hose holders off the ap-

pliance with a strong pull.

39

Image 39

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Page Safety Prior to initial start-upIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsStain removers Description of the ApplianceFront view Detergent dispenser drawerProgramme selector Control panelWool P hand wash Tions cannot be selected any buttons pressed do not Stain removers only become effective at higher temperaturesProgramme option buttons Shortened main washing cycle for lightly soiled washingConsumption data and wash times What does Update mean?Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Changing the spin speed/Selecting Rinse Hold Setting the Washing ProgrammeSoaking duration Setting the delay timer / soaking duration Delay timerLights up green Flashes red Yes Opening and closing the doorLoading the washing See Programme Tables for maximum loadsAdding detergent / conditioner If using liquid detergent / tabletsAdd detergent / conditioner ConditionersProgramme progress display If the delay timer has been setStarting the washing programme Washing Programme ProgressChanging the Spin Speed Change the washing programmeChanging or stopping the wash programme Selecting the programme optionsElectricity mains Washing cycle is complete/Removing the washingWashing Programme tablesSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumCleaning the drain pump Before cleaning the drain pumpGency emptying What to do if Trouble ShootingMachine is not level Limescale or is faulty It repaired if necessaryWater tap is closed Open the water tap No water flows Not been removedCial accessory Clean the detergent disContact your local Service Fault code E20Door High water level or a high Tap is blocked Clean the filter Rinsing water isCloudy Content Detergent if necessary Lights up greenIf there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingAdditional Rinse RINSE+ When the water is completely drainedSetting the additional rinse function Cancelling the additional rinse functionStarted Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Caps D 2 each and G 1 each Cover the hole with the cap GInstallation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelElectrical Connection Measures not be observedEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Page Page Page Multi-display , 19, 22, 30 IndexCustomer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG