Electrolux 72630 manual Carrying out an emergency emptying

Page 35

Operating Instructions

Carrying out an emergency emptying

If the washing machine no longer pumps out the water, emergency emptying must be carried out.

If the washing machine is located in a room in which below freezing temperatures might occur, emergency emptying must be carried out. Furthermore: unscrew the inlet hose from the water tap and drain off the water. Empty the drainage hose.

1Warning! Switch off the washing machine and pull out the mains plug prior to performing emergency emptying.

Warning! The water, which flows out of the emergency emptying hose can be hot. First allow the water to cool down before you carry out the emergency emptying.

0 1. Have a flat container on hand to catch the water.

2. Pull down the flap in the right corner of the base strip outwards and pull it off.

3. Remove the emergency emptying hose from its holder.

4. Place the container under the hose.

5. Detach the plug of the emergency emp- tying hose by turning it anticlockwise and pull it out.

The water runs out. Depending on the amount of water, it may be necessary to empty the collecting vessel several

times. To do this, close the emergency emptying hose temporarily with the plug.

Discard the water from the container, replace it under the emergency emptying hose and remove the plug from the hose.

35

Image 35
Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsStain removers Description of the ApplianceFront view Detergent dispenser drawerProgramme selector Control panelWool P hand wash Tions cannot be selected any buttons pressed do not Stain removers only become effective at higher temperaturesProgramme option buttons Shortened main washing cycle for lightly soiled washingConsumption data and wash times What does Update mean?Sorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details How much detergent and conditioner?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Changing the spin speed/Selecting Rinse Hold Setting the Washing ProgrammeSoaking duration Setting the delay timer / soaking duration Delay timerLights up green Flashes red Yes Opening and closing the doorLoading the washing See Programme Tables for maximum loadsAdding detergent / conditioner If using liquid detergent / tabletsAdd detergent / conditioner ConditionersProgramme progress display If the delay timer has been setStarting the washing programme Washing Programme ProgressChanging the Spin Speed Change the washing programmeChanging or stopping the wash programme Selecting the programme optionsElectricity mains Washing cycle is complete/Removing the washingWashing Programme tablesSeparate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumGency emptying Cleaning the drain pumpBefore cleaning the drain pump What to do if Trouble ShootingMachine is not level Limescale or is faulty It repaired if necessaryWater tap is closed Open the water tap No water flows Not been removedCial accessory Clean the detergent disContact your local Service Fault code E20Door High water level or a high Tap is blocked Clean the filter Rinsing water isCloudy Content Detergent if necessary Lights up greenIf there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingAdditional Rinse RINSE+ When the water is completely drainedSetting the additional rinse function Cancelling the additional rinse functionStarted Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceTransporting the appliance Caps D 2 each and G 1 each Cover the hole with the cap GInstallation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelEarth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Great Britain Page Page Page Multi-display , 19, 22, 30 IndexCustomer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG