Electrolux 72630 manual Washing cycle is complete/Removing the washing, Electricity mains

Page 24

Operating Instructions

Washing cycle is complete/Removing the washing.

Once the washing programme has come to an end, END illuminates on the programme progress display.

If RINSE HOLD was selected, the display beside the START/ PAUSE button flashes.

0 1. After a rinse hold, the water must first be pumped out:

–Either press the START/PAUSE button (the water is pumped out and the washing is spun according to the completed programme; After the START/PAUSE button is pressed again, the spin speed can still also be changed during spinning),

or

–Turn the programme selector to PUMP OUT and press the START/ PAUSE button (the water is pumped out without spinning),

or

–Turn the programme selector to SPIN or SHORT SPIN and press the

START/PAUSE button (the water is pumped out and the washing is spun or gently spun).

At the end of this programme step, the END indicator will illuminate.

2.Open the door.

As soon as the DOOR indicator lights up green, the door can be opened.

3.Remove the washing.

4.Turn the programme selector to OFF.

5.Close the water tap.

6.After washing, pull out the washing detergent dispenser drawer slightly so that it can dry out. Leave the door ajar so that air can circulate in the drum.

3	If the OVERDOSING indicator illuminates, then too

	much detergent was used in the washing programme
	just completed. Observe the dosing recommendations
	of the detergent manufacturer as well as the load
	quantity for the next wash.
	Important! If the washing machine is not to be used for a long period:
	Close the water tap and disconnect the washing machine from the
	electricity mains.

24

Image 24

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Page Safety Prior to initial start-upIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Stain removersControl panel Programme selectorWool P hand wash Stain removers only become effective at higher temperatures Programme option buttonsShortened main washing cycle for lightly soiled washing Tions cannot be selected any buttons pressed do notWhat does Update mean? Consumption data and wash timesBefore the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Setting the Washing Programme Changing the spin speed/Selecting Rinse HoldSetting the delay timer / soaking duration Delay timer Soaking durationOpening and closing the door Loading the washingSee Programme Tables for maximum loads Lights up green Flashes red YesIf using liquid detergent / tablets Add detergent / conditionerConditioners Adding detergent / conditionerIf the delay timer has been set Starting the washing programmeWashing Programme Progress Programme progress displayChange the washing programme Changing or stopping the wash programmeSelecting the programme options Changing the Spin SpeedWashing cycle is complete/Removing the washing Electricity mainsProgramme tables WashingSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpGency emptying Trouble Shooting What to do ifLimescale or is faulty It repaired if necessary Water tap is closed Open the water tap No water flowsNot been removed Machine is not levelClean the detergent dis Contact your local ServiceFault code E20 Cial accessoryTap is blocked Clean the filter Rinsing water is Cloudy Content Detergent if necessaryLights up green Door High water level or a highIf the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Child Safety Feature Cancelling the child safety featureWashing programme can be StartedInstallation and connection instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Cover the hole with the cap G Caps D 2 each and G 1 eachInstallation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceElectrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Page Page Page Index Multi-display , 19, 22, 30Service & Spare Parts 0870 5 929 Help us to help youPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG