Electrolux 72630 manual Installation and connection instructions, Installation Safety Precautions

Page 38

Installation and connection instructions

Installation and connection instructions

Installation Safety Precautions

When moving do not tilt the washing machine onto its front or onto its right hand side (viewed from the front). This is to prevent the pos- sibility of the electronic components becoming wet.

Before installation inspect the machine for transport damage. Do not connect the appliance if it is damaged - contact your retailer.

Ensure all packaging and transit bolts/bars have been removed, see „Removal of Transit Packaging“. Failure to remove transit bolts/bars may cause serious damage to the appliance or property.

Always insert the plug into a correctly installed earthed socket.

Any plumbing work required to install this appliance should be carried out by a plumber or competent person.

Check that the electricity supply is the same as that indicated on the appliance´s rating plate.

Any electrical work required to install this appliance should be carried out by an electrician or competent person.

38

Image 38
Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDetergent dispenser drawer Description of the ApplianceFront view Stain removersControl panel Programme selectorWool P hand wash Shortened main washing cycle for lightly soiled washing Stain removers only become effective at higher temperaturesProgramme option buttons Tions cannot be selected any buttons pressed do notWhat does Update mean? Consumption data and wash timesSorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details How much detergent and conditioner?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Setting the Washing Programme Changing the spin speed/Selecting Rinse HoldSetting the delay timer / soaking duration Delay timer Soaking durationSee Programme Tables for maximum loads Opening and closing the doorLoading the washing Lights up green Flashes red YesConditioners If using liquid detergent / tabletsAdd detergent / conditioner Adding detergent / conditionerWashing Programme Progress If the delay timer has been setStarting the washing programme Programme progress displaySelecting the programme options Change the washing programmeChanging or stopping the wash programme Changing the Spin SpeedWashing cycle is complete/Removing the washing Electricity mainsProgramme tables WashingSeparate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorGency emptying Cleaning the drain pumpBefore cleaning the drain pump Trouble Shooting What to do ifNot been removed Limescale or is faulty It repaired if necessaryWater tap is closed Open the water tap No water flows Machine is not levelFault code E20 Clean the detergent disContact your local Service Cial accessoryLights up green Tap is blocked Clean the filter Rinsing water isCloudy Content Detergent if necessary Door High water level or a highIf after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterCancelling the additional rinse function When the water is completely drainedSetting the additional rinse function Additional Rinse RINSE+Washing programme can be Child Safety FeatureCancelling the child safety feature StartedInstallation and connection instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Cover the hole with the cap G Caps D 2 each and G 1 eachInstallation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceEarth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Great Britain Page Page Page Index Multi-display , 19, 22, 30PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG