Electrolux 72630 manual Starting the washing programme, Washing Programme Progress, Multi-display

Page 22

Operating Instructions

Starting the washing programme

0 1. Check that the water tap is open.

2.Start the washing programme:

Press the START/PAUSE button

The washing programme is started or starts at the end of the time delay set.

3	If the DOOR display flashes red when the START/PAUSE button is
	pressed, the door is not properly closed.

– The display DOOR flashes red

– The error code E40 then flashes in the multi display

– And the MAIN WASH display flashes.

In this case, press the door firmly closed and again press the START / PAUSE button.

If the delay timer has been set:

The start time delay set on the time delay counts down; the time remaining until the programme starts is displayed in the multi-display (in hours remaining, e.g. 5h). During this time you can add washing and change or stop the delay timer.

• Load the washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again.

• Changing or stopping delay timer: Press the DELAY TIMER button re- peatedly until the desired time is displayed. When the programme duration is displayed (display in minutes e. g.126) the washing programme starts without delay.

Washing Programme Progress

Programme progress display

Prior to the start, the programme steps chosen are displayed by the Programme progress display. During the washing programme the current programme step is displayed.

Multi-display

The expected time remaining (in minutes) to the end of the programme is displayed in the multi display.

22

Image 22

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDetergent dispenser drawer Description of the ApplianceFront view Stain removersControl panel Programme selectorWool P hand wash Shortened main washing cycle for lightly soiled washing Stain removers only become effective at higher temperaturesProgramme option buttons Tions cannot be selected any buttons pressed do notWhat does Update mean? Consumption data and wash timesPreparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Setting the Washing Programme Changing the spin speed/Selecting Rinse HoldSetting the delay timer / soaking duration Delay timer Soaking durationSee Programme Tables for maximum loads Opening and closing the doorLoading the washing Lights up green Flashes red YesConditioners If using liquid detergent / tabletsAdd detergent / conditioner Adding detergent / conditionerWashing Programme Progress If the delay timer has been setStarting the washing programme Programme progress displaySelecting the programme options Change the washing programmeChanging or stopping the wash programme Changing the Spin SpeedWashing cycle is complete/Removing the washing Electricity mainsProgramme tables WashingSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorBefore cleaning the drain pump Cleaning the drain pumpGency emptying Trouble Shooting What to do ifNot been removed Limescale or is faulty It repaired if necessaryWater tap is closed Open the water tap No water flows Machine is not levelFault code E20 Clean the detergent disContact your local Service Cial accessoryLights up green Tap is blocked Clean the filter Rinsing water isCloudy Content Detergent if necessary Door High water level or a highIf after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterCancelling the additional rinse function When the water is completely drainedSetting the additional rinse function Additional Rinse RINSE+Washing programme can be Child Safety FeatureCancelling the child safety feature StartedInstallation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Cover the hole with the cap G Caps D 2 each and G 1 eachInstallation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Great Britain Page Page Page Index Multi-display , 19, 22, 30PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG