Electrolux 72630 manual Water tap is closed Open the water tap No water flows, Not been removed

Page 31

 

 

 

Operating Instructions

 

 

 

 

 

 

Problem

Possible Cause

Remedy

 

 

 

Water tap is closed.

Open the water tap.

 

 

No water flows.

 

Close the water tap. Unscrew

 

 

Filter in screw connection of

the hose from the tap, re-

 

 

Fault code E10 ap-

 

 

the inlet hose is blocked.

move the filter and clean un-

 

 

pears. The display

 

 

 

der running water

 

 

RINSE + flashes

 

 

 

 

 

 

 

 

Water tap is blocked with

Check he water tap and have

 

 

 

limescale or is faulty.

it repaired if necessary.

 

 

 

The transport packaging has

Remove transport packaging

 

 

 

according to the installation

 

 

 

not been removed.

 

 

 

and connection instructions.

 

 

 

 

 

 

 

 

Adjust the feet according to

 

 

 

The machine is not level.

the installation and connec-

 

 

 

 

tion instructions.

 

 

The washing machine

There is very little washing in

This does not impair the op-

 

 

vibrates during opera-

 

 

the drum (e.g. only one

 

 

tion or is unstable.

eration of the machine.

 

 

dressing gown).

 

 

 

 

 

 

 

The water could not be com-

Check the the drain hose and

 

 

 

remove any kink if necessary,

 

 

 

pletely pumped out before

or clean the drain pump and,

 

 

 

spinning because the drain-

 

 

 

if required, remove foreign

 

 

 

age hose is kinked or the

 

 

 

bodies from the pump hous-

 

 

 

drain pump is blocked.

 

 

 

ing.

 

 

 

 

 

 

 

 

It may be necessary to re-

 

 

Excessive foaming dur-

Probably too much detergent

duce the amount of deter-

 

 

gent used. Follow the

 

 

ing the main wash.

was used.

 

 

detergent manufacturer's

 

 

 

 

 

 

 

 

recommendations.

 

 

 

 

 

 

 

 

 

 

 

31

Image 31
Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsStain removers Description of the ApplianceFront view Detergent dispenser drawerProgramme selector Control panelWool P hand wash Tions cannot be selected any buttons pressed do not Stain removers only become effective at higher temperaturesProgramme option buttons Shortened main washing cycle for lightly soiled washingConsumption data and wash times What does Update mean?Preparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Changing the spin speed/Selecting Rinse Hold Setting the Washing ProgrammeSoaking duration Setting the delay timer / soaking duration Delay timerLights up green Flashes red Yes Opening and closing the doorLoading the washing See Programme Tables for maximum loadsAdding detergent / conditioner If using liquid detergent / tabletsAdd detergent / conditioner ConditionersProgramme progress display If the delay timer has been setStarting the washing programme Washing Programme ProgressChanging the Spin Speed Change the washing programmeChanging or stopping the wash programme Selecting the programme optionsElectricity mains Washing cycle is complete/Removing the washingWashing Programme tablesSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpGency emptying What to do if Trouble ShootingMachine is not level Limescale or is faulty It repaired if necessaryWater tap is closed Open the water tap No water flows Not been removedCial accessory Clean the detergent disContact your local Service Fault code E20Door High water level or a high Tap is blocked Clean the filter Rinsing water isCloudy Content Detergent if necessary Lights up greenIf there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingAdditional Rinse RINSE+ When the water is completely drainedSetting the additional rinse function Cancelling the additional rinse functionStarted Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsTransporting the appliance Installation of the applianceRemove transport packaging Caps D 2 each and G 1 each Cover the hole with the cap GInstallation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Great Britain Page Page Page Multi-display , 19, 22, 30 IndexCustomer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG