Electrolux 72630 manual Water connection, Water pressure

Page 45

Installation and connection instructions

Water connection

3	The washing machine is provided with safety devices preventing back-
	contamination of the water supply and complies with local water au-

thority requirements.

This appliance is designed to be permanently plumbed into your home’s water supply.

Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.

Important!

– Appliances for connecting to cold water must not be connected to hot water.

– Only use new hose sets for the connection.

Water pressure

The appliance is designed to operate within the following water pressure units. Minimum 1 bar (= 10N/cm2 = 0.1 Mpa), maximum 10 bar (= 100N/cm2 = 1 Mpa).

•If more than 10 bar: Install a pressure-reduction valve upstream

•If less than 1 bar: Unscrew the inlet hose from the appliance at the inlet solenoid valve and remove the flow regulator (to do this, remove the filter with needle nose pliers and remove the rubber washer be- hind the filter). Replace the filter.

45

Image 45

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Page Safety Prior to initial start-upIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Stain removersProgramme selector Control panelWool P hand wash Programme option buttons Stain removers only become effective at higher temperaturesShortened main washing cycle for lightly soiled washing Tions cannot be selected any buttons pressed do notConsumption data and wash times What does Update mean?Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Changing the spin speed/Selecting Rinse Hold Setting the Washing ProgrammeSoaking duration Setting the delay timer / soaking duration Delay timerLoading the washing Opening and closing the doorSee Programme Tables for maximum loads Lights up green Flashes red YesAdd detergent / conditioner If using liquid detergent / tabletsConditioners Adding detergent / conditionerStarting the washing programme If the delay timer has been setWashing Programme Progress Programme progress displayChanging or stopping the wash programme Change the washing programmeSelecting the programme options Changing the Spin SpeedElectricity mains Washing cycle is complete/Removing the washingWashing Programme tablesSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpGency emptying What to do if Trouble ShootingWater tap is closed Open the water tap No water flows Limescale or is faulty It repaired if necessaryNot been removed Machine is not levelContact your local Service Clean the detergent disFault code E20 Cial accessoryCloudy Content Detergent if necessary Tap is blocked Clean the filter Rinsing water isLights up green Door High water level or a highIf there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingSetting the additional rinse function When the water is completely drainedCancelling the additional rinse function Additional Rinse RINSE+Cancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Caps D 2 each and G 1 each Cover the hole with the cap GInstallation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelElectrical Connection Measures not be observedEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Page Page Page Multi-display , 19, 22, 30 Index0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG