Electrolux 72630 manual Installation-Site preparation, Installation on a Suspended Floor

Page 41

Installation and connection instructions

Installation-Site preparation

•The installation surface must be clean, dry and level. Do not install on a deep pile carpet.

•Minor unevenness of the floor surface should never be levelled out by laying pieces of wood, card or similar materials, but should always be compensated for by adjusting the screw feet.

•If the appliance is installed next to a heat source (e.g. cooking appli- ance), a heat insulating pad (87 x 57 cm) must be placed between the appliance and the heat source.

•Do not install the appliance in locations where the temperature may fall below freezing.

•Please ensure that when the appliance is installed it is easily accessi- ble for the engineer in the event of a breakdown.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least

2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.

41

Image 41

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Stain removersProgramme selector Control panelWool P hand wash Programme option buttons Stain removers only become effective at higher temperaturesShortened main washing cycle for lightly soiled washing Tions cannot be selected any buttons pressed do notConsumption data and wash times What does Update mean?Sorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details How much detergent and conditioner?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Changing the spin speed/Selecting Rinse Hold Setting the Washing ProgrammeSoaking duration Setting the delay timer / soaking duration Delay timerLoading the washing Opening and closing the doorSee Programme Tables for maximum loads Lights up green Flashes red YesAdd detergent / conditioner If using liquid detergent / tabletsConditioners Adding detergent / conditionerStarting the washing programme If the delay timer has been setWashing Programme Progress Programme progress displayChanging or stopping the wash programme Change the washing programmeSelecting the programme options Changing the Spin SpeedElectricity mains Washing cycle is complete/Removing the washingWashing Programme tablesSeparate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorGency emptying Cleaning the drain pumpBefore cleaning the drain pump What to do if Trouble ShootingWater tap is closed Open the water tap No water flows Limescale or is faulty It repaired if necessaryNot been removed Machine is not levelContact your local Service Clean the detergent disFault code E20 Cial accessoryCloudy Content Detergent if necessary Tap is blocked Clean the filter Rinsing water isLights up green Door High water level or a highIf there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingSetting the additional rinse function When the water is completely drainedCancelling the additional rinse function Additional Rinse RINSE+Cancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceTransporting the appliance Caps D 2 each and G 1 each Cover the hole with the cap GInstallation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelEarth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Great Britain Page Page Page Multi-display , 19, 22, 30 Index0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG