Miele W 2240 Important control panel features, Programme selector, Additional option buttons

Page 13

Description of the machine

Important control panel features

Programme selector

The programme selector is used to set the basic wash programme and the temperature for that programme.

Additional option buttons

Additional options can be added to the basic programme.

Use the top button to select either the Intensive, the Pre-washor the Soak option or a combination of these options.

Use the lower button to select the Water plus option.

The indicator light will come on to show that the additional option has been selected. If an additional option is chosen, which is incompatible with the basic programme, it cannot be selected.

"Spin" button with indicator lights

Select the spin speed.

Press the "Spin" button to select a different spin speed. You cannot select a spin speed higher than the maximum allowed for the basic wash programme chosen.

The indicator lights show the speed selected.

Wash programme	rpm
Cottons	1400
Minimum iron	900

Delicates	600
Silks	400

Woollens	1200
Quick wash	1400

Automatic	900
Separate rinse	1200

Starch	1400
Drain/spin	1400

You can also omit the final spin

^Press the "Spin" button to reach:

– Rinse hold

The laundry is not spun and remains suspended in the final rinse water. This reduces creasing if the laundry is not going to be removed from the drum immediately after the end of the programme.

To continue the programme select a spin speed. When the programme is finished the Anti-crease/Finishlight will come on. Turn the programme selector to the Finish position and press the door button to open the door and remove the laundry.

–Without spin

The laundry is not spun. After the water has been drained away the machine goes straight into the anti- crease stage. Spinning between the rinses is also omitted in this setting.

13

Image 13

Contents

Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Contents Technical data Correct usage Technical safetyUse Accessories Safety with childrenDisposal of your old machine Special programmes Description of the machine Delicates and Silks / programmes Water plus systemFuture updates PC Control panel Programme duration Spin button with indicator lights Select the spin speed Important control panel featuresProgramme selector Additional option buttonsBefore using for the first time Washing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentBrief instructions How to wash correctlyMinimum iron 30C to 60C Programme chart Cottons 30C to 95C 9ö876Silks 30C /c Delicates cold to 40CWoollens cold to 40C /ac Automatic 40C Quick wash 40CStarch Separate rinseTumble dry Garment care label symbolsIroning ASort the laundry Before washingSelecting a programme Intensive Additional options HSelect additional optionsPre-wash SoakJPress the Start button IAdding detergentAt the end of a programme MSwitch off the washing machineKOpen the drum door LRemove the laundryPlease note Adding or removing laundry after a programme has startedDoor cannot be opened, if Interrupting a programme To cancel or select a different programmeAltering a programme once selected Skipping a programme stageMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Water softeners DetergentWashing with several components Liquid detergentColour run and dye removers/ dyes Fabric conditioners and liquid starchAdding fabric conditioner separately Adding starch separatelyExtra cleaning Cleaning and careCloth Clean the siphon Cleaning the detergent dispenser drawerTo clean the filter in the water inlet valve Cleaning the water inlet filtersProblem Possible cause Remedy Problem solving guideProgramme does not start Problem Possible cause Remedy a Wash programme stops and a fault indicator light comes onWater protection Call the Service Department System has reacted Flashing Appears in the displayFlashes Indicator light isCheck light comes on General problems or an unsatisfactory wash result Does not give Problem Possible cause Remedy Liquid detergentRequired result Grey, greasyDrum door does not open when you press the Door button Procedure for draining the machine Use it to open the access flapRemove the lever Blocked drain outletOpening the drum door Customer contact Optional accessoriesFront view Installation and connectionRear view Installing the washing machine Installation surfaceRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetWasher and Dryer stack Building under a continuous worktop/in a kitchen runReplacing the lid Miele water protection system Electronic unit and washing machine housingInlet hose Drain hoseConnection to the water supply Maintenance and careExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing standard settings Programmable functions Settings are as followsWater plus system Programmable functions Follow steps a to G to programme and store in memory Gentle actionTop-up rinse for Cottons Memory Function Soak Alteration rights reserved/5104/W