Miele W 2240 operating instructions Levelling the machine, Screwing out and adjusting the feet

Page 49

Installation and connection

Levelling the machine

The machine must stand perfectly level on all four feet to ensure safe and proper operation.

Incorrect installation may increase electricity and water consumption and may cause the machine to move about.

Screwing out and adjusting the feet

The four adjustable screw feet are used to level the machine. All four feet are screwed in when the machine is delivered.

^Using the spanner supplied turn counter nut 2 in a clockwise direction. Then turn counter nut 2 together with foot 1 to unscrew.

^Use a spirit level to check the machine is standing level.

^Hold foot 1 securely with a pipe wrench. Turn counter nut 2 again using the spanner supplied until it sits firmly up against the housing.

,All four counternuts must be firmly up against the housing. Please also check this for the feet which did not need adjustment. Otherwise there is the danger of the machine moving about.

49

Image 49

Contents Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Contents Technical data Correct usage Technical safetyUse Accessories Safety with childrenDisposal of your old machine Special programmes Description of the machineDelicates and Silks / programmes Water plus systemFuture updates PC Control panel Programme duration Spin button with indicator lights Select the spin speed Important control panel featuresProgramme selector Additional option buttonsBefore using for the first time Washing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentBrief instructions How to wash correctlyMinimum iron 30C to 60C Programme chart Cottons 30C to 95C 9ö876Silks 30C /c Delicates cold to 40CWoollens cold to 40C /ac Automatic 40C Quick wash 40CStarch Separate rinseTumble dry Garment care label symbolsIroning ASort the laundry Before washingSelecting a programme Intensive Additional options HSelect additional optionsPre-wash SoakJPress the Start button IAdding detergentAt the end of a programme MSwitch off the washing machineKOpen the drum door LRemove the laundryPlease note Adding or removing laundry after a programme has startedDoor cannot be opened, if Interrupting a programme To cancel or select a different programmeAltering a programme once selected Skipping a programme stageMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Water softeners DetergentWashing with several components Liquid detergentColour run and dye removers/ dyes Fabric conditioners and liquid starchAdding fabric conditioner separately Adding starch separatelyExtra cleaning Cleaning and careCloth Clean the siphon Cleaning the detergent dispenser drawerTo clean the filter in the water inlet valve Cleaning the water inlet filtersProblem Possible cause Remedy Problem solving guideProgramme does not start Problem Possible cause Remedy a Wash programme stops and a fault indicator light comes onWater protection Call the Service Department System has reacted Flashing Appears in the displayFlashes Indicator light isCheck light comes on General problems or an unsatisfactory wash result Does not give Problem Possible cause Remedy Liquid detergentRequired result Grey, greasyDrum door does not open when you press the Door button Procedure for draining the machine Use it to open the access flapRemove the lever Blocked drain outletOpening the drum door Customer contact Optional accessoriesFront view Installation and connectionRear view Installing the washing machine Installation surfaceRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetWasher and Dryer stack Building under a continuous worktop/in a kitchen runReplacing the lid Miele water protection system Electronic unit and washing machine housingInlet hose Drain hoseConnection to the water supply Maintenance and careExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing standard settings Programmable functions Settings are as followsWater plus system Programmable functions Follow steps a to G to programme and store in memory Gentle actionTop-up rinse for Cottons Memory Function Soak Alteration rights reserved/5104/W